[Jun-2022] Pass 1Y0-440 Exam in First Attempt Updated1Y0-440 PassTestking Exam Question [Q47-Q67]

NEW QUESTION 47
Scenario: A Citrix Architect and a team of Workspacelab members have met for a design discussion about the NetScaler Design Project. They captured the following requirements:
* Two pairs of NetScaler MPX appliances will be deployed in the DMZ network and the internal network.
* High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.
* Multi-factor authentication must be configured for the NetScaler Gateway virtual server.
* The NetScaler Gateway virtual server is integrated with XenApp/XenDesktop environment.
* Load balancing must be deployed for the users from the workspacelab.com and vendorlab.com domains.
* The logon page must show the workspacelab logo.
* Certificate verification must be performed to identify and extract the username.
* The client certificate must have UserPrincipalName as a subject.
* All the managed workstations for the workspace users must have a client identifications certificate installed on it.
* The workspacelab users connecting from a managed workstation with a client certificate on it should be authenticated using LDAP.
* The workspacelab users connecting from a workstation without a client certificate should be authenticated using LDAP and RADIUS.
* The vendorlab users should be authenticated using Active Directory Federation Service.
* The user credentials must NOT be shared between workspacelab and vendorlab.
* Single Sign-on must be performed between StoreFront and NetScaler Gateway.
* A domain drop down list must be provided if the user connects to the NetScaler Gateway virtual server externally.
* The domain of the user connecting externally must be identified using the domain selected from the domain drop down list.
On performing the deployment, the architect observes that users are always prompted with two-factor authentication when trying to assess externally from an unmanaged workstation.
Click the exhibit button to view the configuration.

What should the architect do to correct this configuration?

NEW QUESTION 48
Scenario: A Citrix Architect is asked by management at the Workspacelab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing Citrix ADC configuration. Currently, the Citrix ADC MPX devices are configured in a high availability pair, and the outbound traffic is load balanced between two Internet service providers (ISPs).
However, the failover is NOT happening correctly. The following requirements were discussed during the design requirement phase:
* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
* The link should fail over even if the ISP router is up and intermediary devices to an ISP router are down.
* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously. What should the architect configure to meet this requirement?

NEW QUESTION 49
Scenario: A Citrix Architect needs to design a hybrid Citrix Virtual App and Citrix Virtual Desktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active Citrix Virtual App and Citrix Virtual Desktop Service subscription
* No existing NetScaler deployment
* About 3,000 remote users are expected to regularly access the environment
* Multi-factor authentication should be used for all external connections
* Solution must provide load balancing for backend application servers
* Load-balancing services must be in Location B
Click the Exhibit button to view the conceptual environment architecture.

The architect should use ________ in Location A, and should use _________ in Location B.
(Choose the correct option to complete the sentence.)

NEW QUESTION 50
Scenario: A Citrix Architect needs to deploy SAML integration between NetScaler (Identity Provider) and ShareFile (Service Provider). The design requirements for SAML setup are as follows:
* NetScaler must be deployed as the Identity Provider (IDP).
* ShareFile server must be deployed as the SAML Service Provider (SP).
* The users in domain workspacelab.com must be able to perform Single Sign-on to ShareFile after authenticating at the NetScaler.
* The User ID must be UserPrincipalName.
* The User ID and Password must be evaluated by NetScaler against the Active Directory servers SFO-ADS-
001 and SFO-ADS-002.
* After successful authentication, NetScaler creates a SAML Assertion and passes it back to ShareFile.
* Single Sign-on must be performed.
* SHA 1 algorithm must be utilized.
The verification environment details are as follows:
* Domain Name: workspacelab.com
* NetScaler AAA virtual server URL https://auth.workspacelab.com
* ShareFile URL https://sharefile.workspacelab.com
Which SAML IDP action will meet the design requirements?

NEW QUESTION 51
Which three methods can a Citrix Architect use to assess the capabilities of a network infrastructure? (Choose three.)

NEW QUESTION 52
Scenario: A Citrix Architect has deployed two MPX devices. 12.0.53.13 nc and MPX 11500 models, in a high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the Citrix ADC devices. Content Switching. SSL Offloading, Load Balancing, Citrix Gateway. Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to Citrix Application Delivery Management 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.
The following requirements were discussed during the implementation:
* All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration.
* All traffic should be secured and any traffic coming Into FITTP should be redirected to HTTPS.
* Single Sign-on should be created for Microsoft Outlook web access (OWA).
* Citrix ADC should recognize Uniform Resource Identifier (URI) and close the session to Citrix ADC when users hit the Logoff button In Microsoft Outlook web access.
* Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.
* The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL.
Which monitor will meet these requirements?

NEW QUESTION 53
Which four load-balancing methods support NetScaler Virtual Server-Level Slow Start? (Choose four.)

NEW QUESTION 54
Scenario: A Citrix Architect has deployed Citrix Gateway integration with the StoreFront server. The Vasco server is used to perform WebAUTH to authenticate users The configuration snippet is as follows:

Which parameter is utilized to calculate the content-length insert in the request sent to the server?

NEW QUESTION 55
Scenario: A Citrix Architect needs to assess an existing NetScaler gateway deployment. During the assessment, the architect collects key requirements for different user groups, as well as the current session profile settings that are applied to those users.
Click the Exhibit button to view the information collected by the architect.

Which configuration should the architect make to meet these requirements?

NEW QUESTION 56
Scenario: A Citrix Architect has configured NetScaler Gateway integration with a XenApp environment to provide access to users from two domains: vendorlab.com and workslab.com. The Authentication method used is LDAP.
Which two steps are required to achieve Single Sign-on StoreFront using a single store? (Choose two.)

NEW QUESTION 57
_________ content type supports sending NITRO commands to NetScaler. (Choose the correct option to complete sentence.)

NEW QUESTION 58
What can help a Citrix Architect prepare to discuss time scales and resource requirements?

NEW QUESTION 59
Scenario: A Citrix Architect has setup Citrix ADC MPX devices in high availability mode with version
12.0.53.13 nc. These are placed behind a Cisco ASA 5505 firewall. The Cisco ASA firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall. The following requirements were captured by the architect during the discussion held as part of the Citrix ADC security implementation project with the customer’s security team: The Citrix ADC MPX device:
* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The Citrix ADC device should be able to stop the HTTP. TOP, and DNS based requests.
* needs to protect backend servers from overloading.
* needs to queue all the incoming requests on the virtual server level instead of the service level.
* should provide access to resources on the basis of priority.
* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets. compromised webservers, known spammersThackers. and phishing proxies.
* should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.
* should block the traffic based on predetermined header length, URL length, and cookie length.The device should ensure that characters such as a single straight quote (‘) backslash (); and semicolon (;) are either blocked, transformed, or dropped being sent to the backend server.
Which security feature should the architect implement to meet these requirements?

NEW QUESTION 60
Scenario: A Citrix Architect needs to design a new solution within Amazon Web Services (AWS) The architect would like to create a high availability Citrix ADC VPX pair to provide load balancing for applications hosted in the AWS deployment within a single availability zone which will receive traffic arriving from the Internet.
Which configuration should the architect choose to accomplish this?

NEW QUESTION 61
What are three potential risks when examining the disaster recovery plan and implementation for a company?
(Choose three)

NEW QUESTION 62
Scenario: A Citrix Architect needs to design a hybrid Citrix Virtual App and Citrix Virtual Desktop environment which will include as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active Citrix Virtual App and Citrix Virtual Desktop Service subscription
* No existing Citrix deployment
* Minimization of additional costs
* All users should use same access point, regardless of network location
* No multi-factor authentication is required
Click the Exhibit button to view the conceptual environment architecture.

The architect should use___________ in Location A, and should use _______________ in Location B.
(Choose the correct option to complete the sentence.)

NEW QUESTION 63
Scenario: Based on a discussion between a Citrix Architect and team of Workspacelab has been created across three (3) sites.
They captured the following requirements during the design discussion held for NetScaler design projects:
* All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configuration and design.
* Both external and internal NetScaler MPX appliances will have Global Server Load balancing (GSLB) configured and deployed in Active/Passive mode.
* GSLB should resolve both A and AAA DNS queries.
* In the GSLB deployment, the NDR site will act as backup for the DC site. whereas the DR site will act as backup for the NDR site.
* When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.
* On the internal NetScaler, both front-end VIP and back-end SNIP will be part of the same subnet.
* USIP is configured on the DMZ NetScaler appliances.
* The external NetScaler will act default gateway for back-end servers.
* All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode.
Which design decision must the architect make to meet the design requirements above?

NEW QUESTION 64
Scenario: A Citrix Architect needs to design a new multi-datacenter Citrix ADC deployment. The customer wants Citrix ADC to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment. Click the Exhibit button to view additional requirements identified by the architect.

Which GSLB algorithm or method should the architect use for the deployment based on the stated requirements?

NEW QUESTION 65
Scenario: A Citrix Architect needs to assess a NetScaler Gateway deployment that was recently completed by a customer and is currently in pre-production testing. The NetScaler Gateway needs to use ICA proxy to provide access to a XenApp and XenDesktop environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.
Click the Exhibit button to view the troubleshooting details collected by the customer.

What is the cause of this issue?

NEW QUESTION 66
Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* Minimization of additional costs
* All users should correct directly to the resource locations containing the servers which will host HDX sessions Click the Exhibit button to view the conceptual environment architecture.

The architect should use___________ in Location A, and should use _______________ in Location B.
(Choose the correct option to complete the sentence.)

NEW QUESTION 67
Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway, Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to NMAS 12.0.53.13 nc build.
The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.
The following requirements were discussed during the implementation:
* All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration
* All traffic should be secured and any traffic coming into HTTP should be redirected to HTTPS.
* Single Sign-on should be created for Microsoft Outlook web access (OWA).
* NetScaler should recognize Uniform Resource Identifier (URl) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.
* Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.
* The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL Which monitor will meet these requirements?