CCNP Enterprise 350-401 Exam Dumps and Certification Test Engine [Q30-Q50]

Rate this post

(PDF) CCNP Enterprise 350-401 Exam and Certification Test Engine

Use 350-401 Exam Dumps (2022 PDF Dumps) To Have Reliable 350-401 Test Engine

Infrastructure (30%)

Configuring first-hop redundancy protocols such as VRRP & HSRP.
Comparing the routing concepts of OSPF & EIGRP;
Describing the Layer 1 concepts;
Describing Network Time Protocol;
Defining the main use and principles cases for Layer 2 & Layer 3 roaming;
Configuring and verifying PAT/NAT;
Describing the access point detection and join process;
Configuring and verifying eBGP between the neighbor relationships & best path selection algorithm;
Configuring and verifying simple OSPF settings;
Defining the AP modes and antenna types;

Q30. Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.

Q31. Drag and drop the characteristics from the left onto the infrastructure deployment models on the right.

Q32. An engineer must configure interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. Which command set must be added to the initial configuration to accomplish this task?

vrrp 10 ip 172.16.13.254
vrrp 10 preempt

standby 10 ip 172.16.13.254
standby 10 priority 120

vrrp group 10 ip 172.16.13 254.255.255.255.0
vrrp group 10 priority 120

standby 10 ip 172.16.13.254 255.255.255.0
standby 10 preempt

Q33. Refer to the exhibit.

An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as an entry point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?

Option A

Option B

Option C

Option D

Q34. Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.

Q35. Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?

Permit 10.0.0.0.0.0.0.1

Permit 10.0.0.1.0.0.0.0

Permit 10.0.0.1.0.0.0.254

Permit 10.0.0.0.255.255.255.254

Q36. Refer to the exhibit.

A network engineer is enabling logging to a local buffer, to the terminal and to a syslog server for all debugging level logs filtered by facility code 7. Which command is needed to complete this configuration snippet?

logging buffered debugging

logging discriminator Disc1 severity includes 7

logging buffered discriminator Disc1 debugging

logging discriminator Disc1 severity includes 7 facility includes fac7

Q37.

Refer to the exhibit. An engineer is investigating why guest users are able to access other guest user devices when the users are connected to the customer guest WLAN. What action resolves this issue?

implement MFP client protection

implement split tunneling

implement P2P blocking

implement Wi-Fi direct policy

Q38. Refer to the exhibit.

Which LISP component do routers in the public IP network use to
forward traffic between the two networks?

RLOC

map resolver

EID

map server

Q39. Refer to the exhibit.

An engineer must establish eBGP peering between router R3 and router R4. Both routers should use their loopback interfaces as the BGP router ID. Which configuration set accomplishes this task?

Option A

Option B

Option C

Option D

Q40. Which function does a fabric wireless LAN controller perform In a Cisco SD-Access deployment?

manages fabric-enabled APs and forwards client registration and roaming information to the Control Plane Node

coordinates configuration of autonomous nonfabric access points within the fabric

performs the assurance engine role for both wired and wireless clients

is dedicated to onboard clients in fabric-enabled and nonfabric-enabled APs within the fabric

Q41. Refer to the exhibit.

An engineer attempts to bundle interface GiO/0 into the port channel, but it does not function as expected. Which action resolves the issue?

Configure channel-group 1 mode active on interface GiO/0.

Configure no shutdown on interface GiO/0

Enable fast LACP PDUs on interface GiO/0.

Set LACP max-bundle to 2 on interface Port-channeM

Q42. Which two GRE features are configured to prevent fragmentation? (Choose two.)

TCP MSS

PMTUD

DF bit Clear

MTU ignore

IP MTU

TCP window size

Q43. Refer to the exhibit. PC-1 must access the web server on port 8080. To allow this traffic, which statement must be added to an access control list that is applied on SW2 port G0/0 in the inbound direction?

permit host 172.16.0.2 host 192.168.0.5 eq 8080

permit host 192.168.0.5 host 172.16.0.2 eq 8080

permit host 192.168.0.5 eq 8080 host 172.16.0.2

permit host 192.168.0.5 it 8080 host 172.16.0.2

Q44. Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.

Q45. What the role of a fusion in an SD-Access solution?

provides connectivity to external networks

acts as a DNS server

performs route leaking between user-defined virtual networks and shared services

provides additional forwarding capacity to the fabric

Q46. Refer to the exhibit.

After running the code in the exhibit. Which step reduces the amount of data that NETCONF server returns to the NETCONF client, to only the interface’s configuration?

Create an XML filter as a string and pass it to get_config() method as an argument

Use the txml library to parse the data returned by the NETCONF server for the interface’s configuration

Create a JSON filter as a string and pass it to the get_config() method as an argument

Use the JSON library to parse the data returned by the NETCONF server for the interface’s configuration

Q47. Drag and drop the descriptions from the left onto the routing protocol they describe on the right.

Q48. How does Protocol Independent Multicast function?

In sparse mode it establishes neighbor adjacencies and sends hello messages at 5-second intervals.

It uses the multicast routing table to perform the multicast forwarding function.

It uses unicast routing information to perform the multicast forwarding function.

It uses broadcast routing information to perform the multicast forwarding function.

Q49. Refer to the exhibit.

Assuming the WLC’s interfaces are not in the same subnet as the RADIUS server, which interface would the WLC use as the source for all RADIUS-related traffic?

the interface specified on the WLAN configuration

any interface configured on the WLC

the controller management interface

the controller virtual interface

Q50. An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.