NACE NACE-CIP1-001 Dumps Questions [2022] Pass for NACE-CIP1-001 Exam [Q51-Q69]

NACE NACE-CIP1-001 Dumps Questions [2022] Pass for NACE-CIP1-001 Exam

Updated NACE Study Guide NACE-CIP1-001 Dumps Questions

The purpose of the NACE CIP1-001 certification is explained here

The objective of the NACE CIP1-001 certification is to test and certify the candidate’s knowledge, skill, and expertise in the field of coatings. The candidates need to acquire a certificate that certifies them as qualified coatings inspectors. The candidate can earn this certification by passing the NACE CIP1-001 exam. Change during curing is a process that is used by manufacturers. In this process, chemicals and additives are added to the concrete mix to change its characteristics. The concrete mix is then cured in order to make it hard and durable. Conforming item is one of the important techniques that are used in the construction industry. It is a process in which a material is used to match another material. The conformity of the two materials depends on the shape, size, and other characteristics. The surface roughness of the material determines whether it is an easy or a difficult surface to paint. The surface should be free of any scratches or stains. The smoothness of the surface also plays an important role. It makes the surface to be more decorative. The paint manufacturer uses a variety of paints to give different colors to the object. The color of the paint depends on the type of surface. Offer free is one of the ways in which coatings are applied to the surfaces. In this technique, a coating is applied over the entire surface. It is a way of giving protection to the object.

Blast standards are used by companies to measure the safety of workers. The NACE CIP1-001 exam dumps help the candidates to get a good score in the exam. They provide you with all the necessary information. We guarantee that the materials we are providing you will help you to crack the exam easily. We give you the NACE CIP1-001 practice test. We make sure that our materials are 100% reliable. We have also given you a money back guarantee. If you are not satisfied with our materials then you can ask for a refund. We are also providing you with free updates. You should use these materials for your preparation. The NACE CIP1-001 exam is very important for all candidates.

Do you know how difficult the NACE CIP1-001 certification is to write?

NACE CIP1-001 certification is a difficult exam. The reason behind this is the wide range of topics covered in the exam. The topics are related to the chemical, physical and biological properties of the coatings. You have to be familiar with these properties. The candidates need to prepare for the NACE CIP1-001 test. They can easily download the NACE CIP1-001 exam dumps. The exam dumps contain different kinds of questions that help the candidates to easily pass the NACE CIP1-001 exam. Questions and answers help you to easily prepare for the NACE CIP1-001 exam. A score report helps you to know how much time is required for your preparation. It is very helpful for the candidates to plan their time. Decide the location where you want to sit for the exam. Accurate and concise questions will help you to easily pass the NACE CIP1-001 exam.

NO.51 The initial steel condition is important to the NACE Inspector because:

 If the steel is pitted more coating will be required

 Less abrasive is need if the mill Scale s gone

 It affects the final appearance after blasting

 The Inspector may have to reject the Steel

NO.52 Which one of these elements is not necessary for corrosion to occur:

 Anode

 Cathode

 Reference Cell

 Electrolyte

NO.53 If the project specification DOES NOT state the specific DFT measurement standards, the inspector should use

 a recognized industry standard like SSPC-PA 2 that is broadly accepted

 NACE 2/SSPC SP10

 their best judgment based on similar projects and specifications.

 a detailed checklist and document the lack of a standard.

NO.54 The most important factor resulting in improved job site safety is:

 Personal Protective Equipment

 Engineering Controls

 Safety Enforcement

 Situational Awareness

NO.55 Digital hygrometers

 consist of a bimetallic sensing element protected from wind gusts.

 are used to measure temperature from a distance.

 use a thermocouple in contact with the surface to measure temperature

 determine relative humidity, air temperature, and dew point temperature:

NO.56 What is the minimum recommended distance away from an edge that an inspector should take a measurement with a dial-type magnetic pull-off Dry Film Thickness (DFT) gauge?

 1 cm (.39 inch)

 2.5 cm (1 inch)

 6.35 cm (2.5 inch)

 2.5 millimeters (.10 inch)

NO.57 Surface profile describes:

 The level of surface cleanliness required after abrasive blasting

 The level of surface roughness required after abrasive blasting

 The initial condition of the surface prior to abrasive blasting

 The general condition of the surface required after abrasive blasting

NO.58 Daily reports are important because:
Select All That Apply

 Inspectors rarely change on a project.

 Management uses them to make personnel decisions.

 the information impacts future projects.

 The information aids communication with supervisors.

NO.59 An Inspector should change position when:

 The Inspector is convinced by verifiable facts

 Only when directed by the supervisor

 The Inspectors position is not the majority position

 The Owner can save some money by the change

NO.60 Removal of surface contaminants is done by:

 Abrasive blasting

 Waterjetting

 A combination of methods

 Scarifying

NO.61 Which is a component that supplies most of the features and functions of the material?

 pigment

 binder

 solvent

 additive

NO.62 You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining.
Your FIRST preferred course of action is to:

 Break the blisters to see what’s inside

 Document the problem and advise the Contractor and Owner’s representative

 Document the problem and advise the Contractor

 Extract any liquid that may be inside the blister and send it to the lab for further analysis

NO.63 Excessive working of the surface with a power grinder can be detrimental because excessive burnishing

 scratches the surface too deeply resulting in uneven coating application

 develops a polished surface, which is a poor anchor profile for most coatings

 damages structural elements thereby speeding up the corrosion process.

 develops a good anchor profile resulting in uneven coating application.

NO.64 Stripe coats are best applied by:

 Airless spray

 Conventional spray

 High volume low pressure spray

 Brush

NO.65 Dew point is the temperature at which

 water freezes.

 humidity decreases

 condensation occurs.

 the air is saturated.

NO.66 The NACE Inspector should perform tests for soluble salts:

 Prior to surface preparation

 After surface preparation

 Prior to coating application

 When specified

NO.67 The form of corrosion that has the largest potential for unexpected catastrophic failure is:

 General Corrosion

 Atmospheric Corrosion

 Galvanic Corrosion

 Localized Corrosion

NO.68 Osmotic blistering is most likely to occur as a result of

 inadequate anchor pattern/surface profile.

 overcoating a surface contaminated with chemical salts.

 airless spray application

 applying tine coating too thin.

NO.69 An exposed area of the substrate or previous coat of a conductive coating material, often caused by poor application technique is called

 cracking.

 sagging.

 holiday.

 checking.

 Loading …

Achieve Success in Actual NACE-CIP1-001 Exam NACE-CIP1-001 Exam Dumps: https://www.passtestking.com/NACE/NACE-CIP1-001-practice-exam-dumps.html