Home  >  NSE7_EFW-6.4 / Fortinet

Easily To Pass New Fortinet NSE7_EFW-6.4 Dumps with 124 Questions [Q40-Q55]

Rate this post

Easily To Pass New Fortinet NSE7_EFW-6.4 Dumps with 124 Questions

Latest NSE7_EFW-6.4 Study Guides 2023 – With Test Engine PDF

NEW QUESTION 40
Which two statements about bulk configuration changes made using FortiManager CLI scripts are correct? (Choose two.)

 
 
 
 

NEW QUESTION 41
An administrator wants to capture ESP traffic between two FortiGates using the built-in sniffer. If the administrator knows that there is no NAT device located between both FortiGates, what command should the administrator execute?

 
 
 
 

NEW QUESTION 42
Which two statements about the Security Fabric are true? (Choose two.)

 
 
 
 

NEW QUESTION 43
View the exhibit, which contains the output of a diagnose command, and then answer the question below.

Which statements are true regarding the output in the exhibit? (Choose two.)

 
 
 
 

NEW QUESTION 44
Examine the following partial outputs from two routing debug commands; then answer the question below.
# get router info kernel
tab=254 vf=0 scope=0type=1 proto=11 prio=0 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.1.254 dev=2(port1) tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.2.254 dev=3(port2) tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254 gwy=0.0.0.0 dev=4(port3)
# get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2, [10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2 Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?

 
 
 
 

NEW QUESTION 45
View the exhibit, which contains the output of a BGP debug command, and then answer the question below.

Which of the following statements about the exhibit are true? (Choose two.)

 
 
 
 

NEW QUESTION 46
View the exhibit, which contains the output of a web diagnose command, and then answer the question below.

Which one of the following statements explains why the cache statistics are all zeros?

 
 
 
 

NEW QUESTION 47
Examine thefollowing partial outputs from two routing debug commands; then answer the question below:

Why the default route using port2 is not displayed in the output of the second command?

 
 
 
 

NEW QUESTION 48
Examine the following routing table and BGP configuration; then answer the question below.

TheBGP connection is up, but the local peer is NOT advertising the prefix192.168.1.0/24. Which configuration change will make the local peer advertise this prefix?

 
 
 
 

NEW QUESTION 49
Which two statements about an auxiliary session are true? (Choose two.)

 
 
 
 

NEW QUESTION 50
Examine the following traffic log; then answer the question below.
date-20xx-02-01 time=19:52:01 devname=master device_id=”xxxxxxx” log_id=0100020007 type=event subtype=system pri critical vd=root service=kemel status=failure msg=”NAT port is exhausted.”
What does the log mean?

 
 
 
 

NEW QUESTION 51
View the exhibit, which contains a partial routing table, and then answer the question below.

Assuming all the appropriate firewall policies are configured, which of the following pings will FortiGate route?(Choose two.)

 
 
 
 

NEW QUESTION 52
A FortiGate is configured as an explicit web proxy. Clients using this web proxy are reposting DNS errors when accessing any website. The administrator executes the following debug commands and observes that the n-dns-timeout counter is increasing:

What should the administrator check to fix the problem?

 
 
 
 

NEW QUESTION 53
Which of the following conditions must be met for a static route to be active in the routing table? (Choose three.)

 
 
 
 
 

NEW QUESTION 54
Examine the output from the ‘diagnose vpn tunnel list’ command shown in the exhibit; then answer the question below.

Which command can be used to sniffer the ESP traffic for the VPN DialUP_0?

 
 
 
 

NEW QUESTION 55
Refer to the exhibit, which contains a TCL script configuration on FortiManager.

An administrator has configured the TCL script onFortiManager, but failed to apply any changes to the managed device after being executed.
Why did the TCL script fail to make any changes to the managed device?

 
 
 
 

Topics of Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 – Enterprise Firewall 6.4 Exam

Following are the objectives and agenda for this certification exam. A detailed practice for these contents could be done via the NSE7 EFW-6.4 practice exams as they are made on the same contents and offer the same environment for students to experience as the real exam does:

System and session troubleshooting

  • High availability
  • Perform initial configuration
  • Traffic and session monitoring

Central management

  • Central management and analysis using FortiManager and FortiAnalyzer

Content inspection

  • Antivirus
  • Web filtering
  • Intrusion Prevention System (IPS)
  • FortiGuard

Routing and Layer 2 switching

  • Static routing
  • Dynamic routing: OSPF, Border Gateway Protocol (BGP)

VPN

  • IPsec
  • Autodiscovery VPN (ADVPN)

How much Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 – Enterprise Firewall 6.4 Exam Cost

The Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 – Enterprise Firewall 6.4 Exam Costs USD 400. As the exam costs may vary country or region vise, it is always recommended to check the official website to see what’s the cost of the exam for your country. The total cost for preparing for the exam will include study materials as well as NSE7 EFW-6.4 exam dumps and NSE7 EFW-6.4 practice exams. Refer to the official website by clicking here for more info on pricing.

Introduction to Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 – Enterprise Firewall 6.4 Exam

This exam is part of the preparation for the NSE 7 certification exam. The Fortinet Network Security Architect designation identifies your advanced skills in deploying, administering, and troubleshooting Fortinet security solutions. We recommend this certification for network and security professionals who are involved in the advanced administration and support of security infrastructures using Fortinet solutions. Visit the Fortinet NSE Certification Program page for information about certification requirements. You must pass a minimum of two Fortinet NSE 7 certification tests successfully:

  • Fortinet NSE 7 – Enterprise Firewall
  • Fortinet NSE 7 – Advanced Threat Protection
  • Fortinet NSE 7 – Enterprise Firewall 6.4 NSE7 EFW-6.4 exam test

The NSE 7 Network Security Architect designation recognizes your advanced skills and ability to deploy, administer, and troubleshoot Fortinet security solutions. To obtain certification, you must pass at least one Fortinet NSE 7 exam. NSE 7 certification is valid for two years from the date of completion. you will learn how FortiGate, FortiAP, FortiSwitch, and FortiAuthenticator enable secure connectivity over wired and wireless networks. You will also learn how to provision, administer, and monitor FortiAP and FortiSwitch devices using FortiManager. This course covers the deployment, integration, and troubleshooting of advanced authentication scenarios, as well as best practices for securely connecting wireless and wired users. You will learn how to keep the network secure by leveraging Fortinet Security Fabric integration between FortiGate, FortiSwitch, FortiAP, and FortiAnalyzer to automatically quarantine risky and compromised devices using IOC triggers.

 

NSE7_EFW-6.4 Dumps and Exam Test Engine: https://www.passtestking.com/Fortinet/NSE7_EFW-6.4-practice-exam-dumps.html

Categories:NSE7_EFW-6.4​Fortinet

Tags:

admin

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below
 

Post comment