Free NCM-MCI-5.20 pdf Files With Updated and Accurate Dumps Training [Q70-Q90]

Rate this post

Free NCM-MCI-5.20 pdf Files With Updated and Accurate Dumps Training

Top-Class NCM-MCI-5.20 Question Answers Study Guide

The NCM-MCI-5.20 certification is highly valued in the IT industry, as it demonstrates an individual’s expertise in designing, deploying, and managing multicloud infrastructure. It is a globally recognized certification that can help IT professionals advance their careers and increase their earning potential.

NO.70 An organization is running a Nutanix Cluster based on AOS 5.10.x and VMware vSphere 6.7. Currently, the CVM network is segmented and Storage only nodes not present.
A new security project based on NSX is coming. VMware Distributed Virtual Switches are required. The administrator needs to prepare the environment for the new project.
Which step should the administrator use to initiate the project?

Enable Nutanix Flow at the Prism Central Level

Manually disable CVM network Segmentation

Convert storage only nodes into vSphere nodes

Enable Jumbo Frames to accommodate network frames

NO.71 An administrator is deploying an application that requires maximum I/O throughput for scratch dat a. The administrator is concerned that the throughput requirement is greater than what can be provided by a single cluster node.
What should the administrator do to meet this requirement?

Create a volume group with several virtual disks and attach to the VM

Create a volume group with one virtual disk attached to the VM

Create a virtual disk attached to the VM’s PCI interface

Create several virtual disks attached to the VM’s virtual SCSI controller

NO.72 An administrator wants to utilize Network Visualization to monitor the physical and logical network on the Nutanix cluster. The first-hop switch has LLDP enabled. The network switch information is still not being displayed.
What is causing this problem?

The ISL between switches is not configured.

SNMP is not configured properly.

br0 and br1 are not defined.

The cluster is using RDMA-enabled NICs.

NO.73 An administrator needs to configure the cluster to ensure all VMs are capable of being restarted in the event of a host failure.
Which option provides this functionality?

HA Reservation

Live Migration

VM Affinity

Best Effort

NO.74 An administrator receives an alert in Prism indicating that interface eth2, on an AHV host is receiving many CRC errors. After togging into the problematic host, the following command is run to show the indicated output:

What is causing this issue?

Incorrect link speeds on the switch

The interface is incorrectly configured with Jumbo Frames

A misconfigured bond

A physical layer network problem

NO.75 An administrator is responsible for the following Nutanix Enterprise Cloud environment:
* A central datacenter with a 20-node cluster with 1.5PB of storage
* Five remote sites each with a 4-node cluster with 200TB storage
The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT. What is the minimum RPO the administrator can achieve for this environment?

0 minutes

15 minutes

1 hour

6 hours

NO.76 Which two advanced features Requires you to install Nutnaix Guest Tools NGT ? ( Choose Two)

Disaster Recovery of a VM between AHV and ESXi Hypervisors

Self-service file-level recovery from VM snapshots

File recovery from a third-party backup

Live Migration of a VM between AHV & other Hyervisors

NO.77 An administrator needs to initiate a new VDI project within a couple of months. Prism Central reports there are no storage resources to accommodate such workloads.
The administrator sees many powered-off VMs and has the authority to delete test VMs powered off at least for 30 days. Test VMs belong to the Test category.
Using Prism Central, which steps are required to identify the correct VMs to be deleted?

Use Capacity Runway to filter by Test and Powered-off VMs

Filter VMs list, choose Test category and Inactive under Efficiency

Create a new Scenario selecting Test VMs. filter by uptime

Create a new Project selecting Test VMs, sorting by power state

NO.78 How should an administrator view the storage consumed by the recycle bin?

On the storage Overview dashboard

In the Cluster Details Page of the cluster setting

On the storage Summary Widget on the Prism Dashboard

In the Diagram or Table view on the Storage dashboard

NO.79 An administrator needs to configure snapshots for DR scenarios. The databases get refreshed on Friday nights regularly. The search service application re-indexes the new application on Saturday nights regularly. The remaining front-end and middle tier VMs are static but do get minor version updates weekly.
The administrator needs to have 2 weeks of daily snapshots for all the VMs in an app group and 2 weeks application consist local snapshots only on Fridays, Saturdays and Sundays on the same group of VMs.
Which two options should the administrator use to configure snapshots?

Create a schedule in a protection domain for all applicable VMs to snap daily with application consistency enabled with 6 days of retention and with no application consistency and 14 days local retention.

Create two consistency groups in a protection domain, one for front-end and middle tier apps with no application consistency, one for database and Search apps with application consistency, and apply the correct schedule to both groups.

Create one protection domain for all VMs in an application group with scheduled daily non-application consistent snapshots and another protection domain for all VMs in an application group with scheduled Friday. Saturday, Sunday application consistent snapshots.

NO.80 An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers. An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)

Confirm that the NTP servers are reachable from the CVMs.

Restart genesis on all CVMs.

On a CVM. run the command a Hash ntpq -pn.

Restart the chronos service on all CVMs.

NO.81 An administrator receives reports about a Nutanix environment. The investigation finds the following;
* VMs are experiencing very high latency
* Each node is equipped with a single SSD, utilized at 95%
* Each node is equipped with three HDDs, utilized at 40%
Why are the guest VMs experiencing high latency?

CVMs are overwhelmed by disk balancing operations.

All VM write operations are going to HDD.

All VM read operations are coming from HDD.

VMs are unable to perform write operations.

NO.82 The networking team makes changes to the Top of Rack switches to which the Nutanix cluster are attached. A few VMs are able to communicate with each other on the same node but are unable to connect to other parts of the network.
What is the likely cause of this issue?

There is a VLAN misconfiguration on the VMs.

The vNIC port is disconnected on the affected VMs.

There is a VLAN misconfiguration on the switch.

Jumbo Frame are misconfigured across ports.

NO.83 An administrator has two clusters: Site A and Site B.
Async DR is configured between the clusters as follows:
* Site A is the Primary Site
* Site B is the Secondary inactive Site, no VMs running
* Site A is fully in Production
* Site B used as Backup/Disaster Recovery
The customer wants to perform a planned failover between the sites.
How should the administrator accomplish this?

Click Activate on the Secondary site within the Data Protection Dashboard

Click Activate on the Secondary site and run deactive NCLI command on Primary site

Choose Migrate on the Secondary site within the Data Protection Dashboard

Choose Migrate on the Primary site within the Data Protection Dashboard

NO.84 An administrator has planned a RAM upgrade on a 3-node Nutanix cluter.
Which step should be performed first, for a non-disruptive memory upgrade?

Run NCC

Stop one CVM at time

Power off one host at time

Live Migrate VMs

NO.85 An administrator is deploying several new application VMs to a Nutanix cluster. The application is very transactional with a 28/72 random, read/write ratio.
What should the administrator do?

Add a minimum of four SSDs to each node to ensure all writes go to the SSDs.

Add a minimum of four virtual disks to each VM, and aggregate them on guest OS level.

Add one large SSD to each node and enable Flash Mode for the VMs.

Add one large virtual disk to each VM. and use it for all application data.

NO.86 An administrator is using Nutanix Move to migrate a Windows VM from ESXi to AHV. Automated guest preparation is failing with an error:
Account has UAC enabled error
The administrator is using the local built-in administrator account for the Windows VM Admin approval mode must remain enabled.
What should the administrator do to continue with the migration with Nutanix Move?

Use a Domain Admin account for the Windows VM

Reboot the Windows VM and try the migration again

Follow manual VM preparation guidelines

Place Windows VM in Maintenance Mode

NO.87 An administrator has a 4-node Nutanix cluster running on AHV. The administrator creates a new storage container and makes that all available to all hosts.
Which storage protocol is used for Virtual Machines to access virtual disks on the storage container?

NFS

Fiber Channel

iSCSI

SMB/CIFS

NO.88 An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicate with only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?

Configure bond0 as balance-sib

Configure bond0 as active-backup

Configure bond0 as balance-tcp

Configure bond0 as balance-lacp

NO.89 A three-node cluster has a Nutanix Files instance with three FSVMs.
What happens after a node failure?

The affected FSVM will get live-migrated to another node.

The affected FSVM will not be restarted on another node due to its agent VM setting.

The affected FSVM will not be restarted on another node due to its VM-to-VM anti-affinity settings.

The affected FSVM will be restarted on another node.

NO.90 An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
* Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?

Inline Compression

Flash Mode

Cache Dedup

Post-Process Compression