Get Jul-2023 updated Exam JN0-335 Dumps with New Questions [Q24-Q48]

Published date July 10, 2023

Rate this post

Get Jul-2023 updated Exam JN0-335 Dumps with New Questions

100% Pass Guarantee for JN0-335 Exam Dumps with Actual Exam Questions

Juniper JN0-335 certification exam, also known as the Security, Specialist (JNCIS-SEC), is a highly sought after certification for professionals in the cybersecurity industry. JN0-335 exam is designed for individuals who have a deep understanding of Junos Security and are able to configure and troubleshoot security issues on Juniper Networks devices.

QUESTION 24
Which two statements are correct regarding reth interfaces? (Choose two.)

Child interfaces must be in the same slot on both nodes

Child interfaces do not need to be in the same slot on both nodes.

Child interfaces must be the same Ethernet interface type.

Child interfaces can be a mixture of Ethernet interface types.

QUESTION 25
You are deploying the Junos application firewall feature in your network.
In this scenario, which two elements are mapped to applications in the application system cache?
(Choose two.)

destination port

source port

destination IP address

source IP address

QUESTION 26
Referring to the SRX Series flow module diagram shown in the exhibit, where is IDP/IPS processed?

Forwarding Lookup

Services ALGs

Screens

Security Policy

QUESTION 27
You want to manually failover the primary Routing Engine in an SRX Series high availability cluster pair.
Which step is necessary to accomplish this task?

Issue the set chassis cluster disable reboot command on the primary node.

Implement the control link recover/ solution before adjusting the priorities.

Manually request the failover and identify the secondary node

Adjust the priority in the configuration on the secondary node.

In order to manually failover the primary Routing Engine in an SRX Series high availability cluster pair, you must issue the command “set chassis cluster disable reboot” on the primary node. This command will disable the cluster and then reboot the primary node, causing the secondary node to take over as the primary node.

QUESTION 28
Which two statements are correct about server-protection SSP proxy? (Choose two.)

The server-protection SSL proxy intercepts the server certificate.

The server-protection SSL proxy is also known as SSL reverse proxy.

The server-protection SSL proxy forwards the server certificate after modification.

The server-protection SSL proxy acts as the server from the client’s perspective.

QUESTION 29
Click the Exhibit button.

Referring to the exhibit, which two values in the JIMS SRX client configuration must match the values configured on the SRX client? (Choose two.)

IPv6 Reporting

Client ID

Client Secret

Token Lifetime

https://www.juniper.net/documentation/en_US/jims/topics/task/configuration/jims-srx- configuring.html

QUESTION 30
Using the information from the exhibit, which statement is correct?

Redundancy group 1 is in an ineligible state.

Node1 is the active node for the control plane

There are no issues with the cluster.

Redundancy group 0 is in an ineligible state.

QUESTION 31
Which statement regarding Juniper Identity Management Service (JIMS) domain PC probes is true?

JIMS domain PC probes analyze domain controller security event logs at60-mmute intervals by default.

JIMS domain PC probes are triggered if no username to IP address mapping is found in the domain security event log.

JIMS domain PC probes are triggered to map usernames to group membership information.

JIMS domain PC probes are initiated by an SRX Series device to verify authentication table information.

Juniper Identity Management Service (JIMS) domain PC probes are used to map usernames to IP addresses in the domain security event log. This allows for the SRX Series device to verify authentication table information, such as group membership. The probes are triggered whenever a username to IP address mapping is not found in the domain security event log. By default, the probes are executed at 60-minute intervals.

QUESTION 32
You want to permit access to an application but block application sub-Which two security policy features provide this capability? (Choose two.)

URL filtering

micro application detection

content filtering

APPID

The two security policy features that provide the capability to permit access to an application but block its sub-applications are URL filtering and micro application detection. URL filtering allows you to create policies that permit or block access to certain websites or webpages based on URL patterns. Micro application detection is a more sophisticated approach that can identify and block specific applications, even if they are embedded within other applications or websites. According to the Juniper Networks Certified Internet Specialist (JNCIS-SEC) Study Guide [1], “micro application detection is the most accurate way to detect and control applications.” Content filtering and APPID are more general approaches and are not as effective in providing the level of granularity needed to block sub-applications.

QUESTION 33
The DNS ALG performs which three functions? (Choose three.)

The DNS ALG performs the IPv4 and IPV6 address transformations.

The DNS ALG performs DNS doctoring.

The DNS ALG modifies the DNS payload in NAT mode.

The DNS ALG performs DNSSEC.

The DNS ALG performs DNS load balancing.

QUESTION 34
The AppQoE module of AppSecure provides which function?

The AppQoE module provides application-based routing.

The AppQoE module prioritizes important applications.

The AppQoE module provides routing, based on network conditions.

The AppQoE module blocks access to risky applications.

QUESTION 35
Which two statements are true about virtualized SRX Series devices? (Choose two.)

vSRX cannot be deployed in transparent mode.

cSRX can be deployed in routed mode.

cSRX cannot be deployed in routed mode.

vSRX can be deployed in transparent mode.

QUESTION 36
After a software upgrade on an SRX5800 chassis cluster, you notice that both node0 and node1 are in the primary state, when node1 should be secondary. All control and fabric links are operating normally.
In this scenario, which step must you perform to recover the cluster?

Execute the request system reboot command on node1.

Execute the request system software rollback command on node0.

Execute the request system software add command on node1.

Execute the request system reboot command on node0.

QUESTION 37
Which two features are configurable on Juniper Secure Analytics (JSA) to ensure that alerts are triggered when matching certain criteria? (Choose two.)

building blocks

assets

events

tests

The two configurable features on Juniper Secure Analytics (JSA) that can be used to ensure that alerts are triggered when matching certain criteria are events and tests. Events refer to the collection of data from different sources, while tests are used to define the criteria for which an alert is triggered. For example, you can use events to collect data from a firewall and tests to define criteria such as IP address, port number, and the type of traffic.

QUESTION 38
Your manager asks you to provide firewall and NAT services in a private cloud. Which two solutions will fulfill the minimum requirements for this deployment? (Choose two.)

a single vSRX

a vSRX for firewall services and a separate vSRX for NAT services

a cSRX for firewall services and a separate cSRX for NAT services

a single cSRX

A single vSRX or cSRX cannot provide both firewall and NAT services simultaneously. To meet the minimum requirements for this deployment, you need to deploy a vSRX for firewall services and a separate vSRX for NAT services (option B), or a cSRX for firewall services and a separate cSRX for NAT services (option C).

QUESTION 39
Which security log message format reduces the consumption of CPU and storage?

WELF

BSD syslog

binary

structured syslog

QUESTION 40
You enable chassis clustering on two devices and assign a cluster ID and a node ID to each device. In this scenario, what is the correct order for rebooting the devices?

Reboot the secondary device, then the primary device.

Reboot only the secondary device since the primary will assign itself the correct cluster and node ID.

Reboot the primary device, then the secondary device.

Reboot only the primary device since the secondary will assign itself the correct cluster and node ID.

when enabling chassis clustering on two devices, the correct order for rebooting them is to reboot the primary device first, followed by the secondary device. It is not possible for either device to assign itself the correct cluster and node ID, so both devices must be rebooted to ensure the proper configuration is applied.

QUESTION 41
Which two statements are true about Juniper ATP Cloud? (Choose two.)

Dynamic analysis is always performed to determine if a file contains malware.

If the cache lookup determines that a file contains malware, performed to verify the results.

Dynamic analysis is not always necessary to determine if a file contains malware.

If the cache lookup determines that a file contains malware, static analysis is not performed to verify the results.

Dynamic analysis is not always necessary to determine if a file contains malware, as the ATP Cloud uses a cache lookup to quickly identify known malicious files. If the cache lookup determines that a file contains malware, static analysis is not performed to verify the results.

QUESTION 42
A client has attempted communication with a known command-and-control server and it has reached the configured threat level threshold.
Which feed will the clients IP address be automatically added to in this situation?

the command-and-control cloud feed

the allowlist and blocklist feed

the custom cloud feed

the infected host cloud feed

Infected hosts are internal hosts that have been compromised by malware and are communicating with external C&C servers. Juniper ATP Cloud provides infected host feeds that list internal IP addresses or subnets of infected hosts along with a threat level. Once the Juniper ATP Cloud global threshold for an infected host is met, that host is added to the infected host feed and assigned a threat level of 10 by the cloud. You can also configure your SRX Series device to block traffic from these IP addresses using security policies.

QUESTION 43
You want to set up JSA to collect network traffic flows from network devices on your network.
Which two statements are correct when performing this task? (Choose two.)

BGP FlowSpec is used to collect traffic flows from Junos OS devices.

Statistical sampling increases processor utilization

Statistical sampling decreases event correlation accuracy.

Superflows reduce traffic licensing requirements.

The two correct statements when performing this task are A.
BGP FlowSpec is used to collect traffic flows from Junos OS devices, and C.
Statistical sampling decreases event correlation accuracy.
BGP FlowSpec is a Junos OS feature that allows network devices to send traffic flow information to a Juniper security device using BGP.
This allows the Juniper security device to monitor and collect the traffic flows and analyze them for suspicious activity.
Statistical sampling increases processor utilization by selecting only a subset of the data to be analyzed, which can help reduce the amount of data sent to the security device.
However, this also decreases the accuracy of event correlation, as some events may be missed due to the sampling. Superflows reduce traffic licensing requirements by offloading the processing of certain traffic flows to the device itself, instead of having it sent to the security device.

QUESTION 44
The output shown in the exhibit is displayed in which format?

syslog

sd-syslog

binary

WELF

QUESTION 45
Click the Exhibit button.

Referring to the exhibit, which two values in the JIMS SRX client configuration must match the values configured on the SRX client? (Choose two.)

IPv6 Reporting

Client ID

Client Secret

Token Lifetime

QUESTION 46
The output shown in the exhibit is displayed in which format?

syslog

WELF

binary

sd-syslog

QUESTION 47
Which two statements are correct about Juniper ATP Cloud? (Choose two.)

Once the target threshold is met, Juniper ATP Cloud continues looking for threats from 0 to 5 minutes.

Once the target threshold is met, Juniper ATP Cloud continues looking for threats levels range from 0 to 10 minutes.

The threat levels range from 0-10.

The threat levels range from 0-100.

According to the Juniper Networks JNCIS-SEC Study Guide, Juniper ATP Cloud sets target thresholds for security events and then continuously scans the environment for any activity that exceeds this threshold. Once the threshold is met, Juniper ATP Cloud continues looking for threats for a period of 0 to 5 minutes. The threat levels range from 0 to 10, with 0 being the lowest and 10 being the highest.

QUESTION 48
Which three statements are true about the difference between cSRX-based virtual security deployments and vSRX-based virtual security deployments? (Choose three.)

vSRX provides Layer 2 to Layer 7 secure services and cSRX provides Layer 4 to Layer 7 secure services.

cSRX requires less storage and memory space for a given deployment than vSRX-based solutions.

cSRX-based solutions are more scalable than vSRX-based solutions.

vSRX and cSRX both provide Layer 2 to Layer 7 secure services.

vSRX provides faster deployment time and faster reboots compared to cSRX.

Loading …

Juniper JN0-335 certification exam is a prerequisite for many advanced Juniper Networks security certifications, including the Juniper Networks Certified Internet Specialist Security (JNCIS-SEC) and the Juniper Networks Certified Internet Expert Security (JNCIE-SEC). Security, Specialist (JNCIS-SEC) certification enables candidates to demonstrate their proficiency in identifying, configuring, and troubleshooting security solutions that meet the needs of modern networks.

JN0-335 exam dumps with real Juniper questions and answers: https://www.passtestking.com/Juniper/JN0-335-practice-exam-dumps.html

Categories:JN0-335Juniper

Tags:JN0-335 Passing Score JN0-335 reliable exam sample online JN0-335 test tutorials JN0-335 valid test questions and answers new JN0-335 exam preparation new JN0-335 test study guide

admin

JN0-251 / Juniper

Juniper JN0-251 Dumps Questions [2024] Pass for JN0-251 Exam [Q44-Q67]
JN0-222 / Juniper

[Jan 03, 2023] JN0-222 Sample with Accurate & Updated Questions [Q19-Q36]
JN0-648 / Juniper

[Q42-Q58] Juniper JN0-648 Practice Verified Answers – Pass Your Exams For Sure! [2022]
JN0-250 / Juniper

[Mar-2022] Juniper JN0-250 Test Engine PDF – All Free Dumps from PassTestking [Q38-Q61]
JN0-363 / Juniper

JNCIS-SP JN0-363 Practice Test Engine Try These 265 Exam Questions [Q157-Q177]
JN0-422 / Juniper

[UPDATED 2023] Free Juniper JN0-422 Exam Questions Self-Assess Preparation [Q37-Q53]