NSE7_OTS-6.4 Dumps Updated Oct 21, 2023 Practice Test and 37 unique questions [Q10-Q33]

Rate this post

NSE7_OTS-6.4 Dumps Updated Oct 21, 2023 Practice Test and 37 unique questions

2023 Latest 100% Exam Passing Ratio – NSE7_OTS-6.4 Dumps PDF

Fortinet NSE7_OTS-6.4 (Fortinet NSE 7 – OT Security 6.4) certification exam is designed to test the skills and knowledge of candidates involved in securing operational technology (OT) networks. Fortinet NSE 7 – OT Security 6.4 certification is an advanced-level exam that covers topics such as OT network security architecture, device hardening, and intrusion prevention. NSE7_OTS-6.4 exam is intended for security professionals who are responsible for securing OT networks and ensuring their availability, integrity, and confidentiality.

NEW QUESTION 10
As an OT administrator, it is important to understand how industrial protocols work in an OT network.
Which communication method is used by the Modbus protocol?

It uses OSI Layer 2 and the primary device sends data based on request from secondary device.

It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.

It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.

It uses OSI Layer 2 and the secondary device sends data based on request from primary device.

NEW QUESTION 11
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)

The administrator selected the wrong logs to be indexed in FortiAnalyzer.

The administrator selected the wrong time period for the report.

The administrator selected the wrong devices in the Devices section.

The administrator selected the wrong hcache table for the report.

https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/32cb817d-a307-11eb-b70b-00505692583a/FortiAnalyzer-7.0.0-Administration_Guide.pdf

NEW QUESTION 12
Refer to the exhibit, which shows a non-protected OT environment.

An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)

Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.

Deploy a FortiGate device within each ICS network.

Configure firewall policies with web filter to protect the different ICS networks.

Configure firewall policies with industrial protocol sensors

Use segmentation

NEW QUESTION 13
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?

The user was determined by Security Fabric

FortiGate determined the user by passive authentication

FortiNAC determined the user by DHCP fingerprint method

Two-factor authentication is not configured with RADIUS authentication method

NEW QUESTION 14
Refer to the exhibit.

Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)

Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.

Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.

IT and OT networks are separated by segmentation.

FortiGate-3 and FortiGate-4 devices must be in a transparent mode.

NEW QUESTION 15
Which three common breach points can be found in a typical OT environment? (Choose three.)

Global hat

Hard hat

VLAN exploits

Black hat

RTU exploits

NEW QUESTION 16
Refer to the exhibit.

You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?

In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.

In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.

In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.

In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.

NEW QUESTION 17
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?

FortiGate

FortiEDR

FortiSwitch

FortiNAC

NEW QUESTION 18
Refer to the exhibit.

An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)

The FortiGate-Edge device must be in NAT mode.

NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.

The FortiGate devices is in offline IDS mode.

Port5 is not a member of the software switch.

NEW QUESTION 19
Refer to the exhibit.

An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)

The FortiGate-Edge device must be in NAT mode.

NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.

The FortiGate devices is in offline IDS mode.

Port5 is not a member of the software switch.

NEW QUESTION 20
Refer to the exhibit, which shows a non-protected OT environment.

An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)

Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.

Deploy a FortiGate device within each ICS network.

Configure firewall policies with web filter to protect the different ICS networks.

Configure firewall policies with industrial protocol sensors

Use segmentation

NEW QUESTION 21
Refer to the exhibit.

An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?

A FortiSIEM CMDB report

A FortiAnalyzer device report

A FortiSIEM incident report

A FortiSIEM analytics report

NEW QUESTION 22
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?

RADIUS

Link traps

End station traffic monitoring

MAC notification traps

NEW QUESTION 23
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)

Enhanced point of connection details

Direct VLAN assignment

Adapter consolidation for multi-adapter hosts

Importation and classification of hosts

NEW QUESTION 24
Refer to the exhibit.

Which statement about the interfaces shown in the exhibit is true?

port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.

The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.

port1-vlan10 and port2-vlan10 are part of the same broadcast domain

port1, port1-vlan10, and port1-vlan1 are in different broadcast domains

NEW QUESTION 25
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?

Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.

Enable two-factor authentication with FSSO.

Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.

Under config user settings configure set auth-on-demand implicit.

NEW QUESTION 26
When you create a user or host profile, which three criteria can you use? (Choose three.)

Host or user group memberships

Administrative group membership

An existing access control policy

Location

Host or user attributes

https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles

NEW QUESTION 27
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?

RADIUS

Link traps

End station traffic monitoring

MAC notification traps

FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
Reference:
Fortinet NSE 7 – OT Security 6.4 Study Guide, Chapter 4: OT Security Devices, page 4-28.

NEW QUESTION 28
What two advantages does FortiNAC provide in the OT network? (Choose two.)

It can be used for IoT device detection.

It can be used for industrial intrusion detection and prevention.

It can be used for network micro-segmentation.

It can be used for device profiling.

NEW QUESTION 29
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)

You must set correct operator in event handler to trigger an event.

Each playbook can include multiple triggers.

You can automate SOC tasks through playbooks.

You cannot use Windows and Linux hosts security events with FortiSoC.

Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc

NEW QUESTION 30
What triggers Layer 2 polling of infrastructure devices connected in the network?

A failed Layer 3 poll

A matched security policy

A matched profiling rule

A linkup or linkdown trap

NEW QUESTION 31
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)

You must set correct operator in event handler to trigger an event.

You can automate SOC tasks through playbooks.

Each playbook can include multiple triggers.

You cannot use Windows and Linux hosts security events with FortiSoC.

Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc

NEW QUESTION 32
Refer to the exhibit.

An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?

A FortiSIEM CMDB report

A FortiAnalyzer device report

A FortiSIEM incident report

A FortiSIEM analytics report

NEW QUESTION 33
Refer to the exhibit.

You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?

You must use a FortiAuthenticator.

You must register the same FortiToken on more than one FortiGate.

You must use the user self-registration server.

You must use a third-party RADIUS OTP server.

Loading …

Fortinet NSE7_OTS-6.4 exam is a vendor-neutral certification exam that is recognized by industry professionals and organizations. Fortinet NSE 7 – OT Security 6.4 certification demonstrates the candidate’s ability to secure OT systems and their knowledge of industry regulations and standards related to OT security. Fortinet NSE 7 – OT Security 6.4 certification is also recognized by employers and can help candidates to advance their careers in the field of OT security.

Verified NSE7_OTS-6.4 dumps Q&As – 100% Pass from PassTestking: https://www.passtestking.com/Fortinet/NSE7_OTS-6.4-practice-exam-dumps.html

Categories:NSE7_OTS-6.4Fortinet