Free VMware 2V0-41.20 Exam 2023 Practice Materials Collection [Q14-Q38]

Rate this post

Free VMware 2V0-41.20 Exam 2023 Practice Materials Collection

2V0-41.20 Exam Info and Free Practice Test All-in-One Exam Guide Nov-2023

Achieving the Professional VMware NSX-T Data Center certification demonstrates that an IT professional has the skills and knowledge required to design, deploy, and manage VMware NSX-T Data Center solutions. Professional VMware NSX-T Data Center certification validates an individual’s expertise in network virtualization and security, which are essential skills for modern IT professionals.

NEW QUESTION 14
Which component does the hyperbus interface (vmk50) provide network connectivity to?

containers running on ESXi/KVM transport nodes

virtual machines and containers running across transport nodes

virtual machines running on the same hypervisor

virtual machines running in the same segment

NEW QUESTION 15
Which network tool cloud an administrator use on an ESXi 7 host to capture packets when troubleshooting connectivity issues?

Wireshark

pktcap-uw

net-stats

tcpdump

NEW QUESTION 16
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)

stateful services leveraged

Failover of services

traffic predictability

traffic load balancing

increased north/south bandwidth

From ICM manual:
Equal-cost multipath (ECMP) routing has several features and functions:
* ECMP routing increases the north-south communication bandwidth by combining multiple uplinks.
* ECMP routing performs traffic load balancing.
* ECMP routing provides fault tolerance for failed paths.
* A maximum of eight ECMP paths are supported.
* Hashing is based on 2-tuple IP source and destination addresses.
* ECMP routing is only available on Tier-0 gateways.

NEW QUESTION 17
Which profile must be attached to the ESXi cluster to prepare the host for NSX-T Data Center?

Transport Node Profile

Uplink Profile

Switching Profile

Host Profile

NEW QUESTION 18
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?

virsh start <NSX-Manager-ID>

virsh poweron <nsx-manager-ID>

virsh start <NSX-Manager-Name>

virsh poweron <nsx-manager-name>

Explanation/Reference:

NEW QUESTION 19
Which statement is true about an alarm in a Suppressed state?

An alarm can be suppressed for a specific duration in days.

An alarm can be suppressed for a specific duration in minutes.

An alarm can be suppressed for a specific duration in seconds.

An alarm can be suppressed for a specific duration in hours.

NEW QUESTION 20
Which two choices are use cases for Distributed Intrusion Detection? (Choose two.)

Identify security vulnerabilities in the workloads.

Use agentless antivirus with Guest Introspection.

Quarantine workloads based on vulnerabilities.

Identify risk and reputation of accessed websites.

Gain insight about micro-segmentation traffic flows.

NEW QUESTION 21
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?

Create a secondary vNIC on each quest VM for SVM communication.

Place a partner SVM on each compute cluster node.

Centralize partner SVMs in a service cluster.

Add partner SVMs to an edge cluster.

Explanation
“For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster.”

NEW QUESTION 22
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)

Service Deployment

Service Insertion

Service Consumption

Service Registration

Service Introspection

NEW QUESTION 23
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host’s physical adapter?

Switch Visualization

Port Mirroring

Activity Monitoring

IPFIX

NEW QUESTION 24
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

get support-bundle file vcpnv.tgz

set support-bundle file vcpnv.tgz

vm-support

esxcli system syslog config logger set –id=nsxmanager

Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html

NEW QUESTION 25
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)

5685

1235

5671

5678

1234
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual

NEW QUESTION 26
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.
Which two NAT rule types are supported for this configuration? (Choose two.)

Port NAT

Source NAT

Destination NAT

1:1 NAT

Reflexive NAT

NEW QUESTION 27
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
join management-cluster <nsx-cluster-IP> username admin password <admin-

password> thumbprint <nsx-manager-thumbprint>
join cluster <nsx-cluster-IP> username root password <root-password>

thumbprint <nsx-manager-thumbprint>
join policy-manager <nsx-manager-ip> username root password <root-password>

thumbprint <nsx-manager-thumbprint>
join management-plane <nsx-nanager-ip> username admin password <admin-

password> thumbprint <nsx-manager-thumbprint>

NEW QUESTION 28
Refer to the exhibit.

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

SNAT

Reverse NAT

DNAT

1:1 NAT

NEW QUESTION 29
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

esxcli network diag ping -H <destination IP address>

vmkping ++netstack=geneve -d -s 1572 <destination IP address>

vmkping ++netstack=vxlan-d -s 1572 <destination IP address>

esxcli network diag ping -I vmk0 -H <destination IP address>

https://kb.vmware.com/s/article/1003728

NEW QUESTION 30
Refer to the exhibit.

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

SNAT

Reverse NAT

DNAT

1:1 NAT

Explanation/Reference:

NEW QUESTION 31
Refer to the exhibit.

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

SNAT

Reverse NAT

DNAT

1:1 NAT

NEW QUESTION 32
Where are Distributed Firewall logs containing access decisions stored?

NSX API

NSX Edge

NSX Manager

Hypervisor transport node

https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6F9DC53E-222D-464B-8613-AB2D517CE5E3.html
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A299-0C3C3546ABF3.html

NEW QUESTION 33
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)

Multicast routing is implemented with PIM Sparse-Mode.

IGMP Snooping is used to populate multicast forwarding tables.

Tier-0 gateways can be the Rendezvous Point.

Multicast is supported in ESXi and KVM transport nodes.

An Edge can be the Rendezvous Point.

Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

NEW QUESTION 34
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

virsh dumpxml <VM Name> | grep interfaceid

virsh get-interface <VM Name>

virsh show <VM Name> | grep interfaceid

virsh list-interface <VM Name>

https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

NEW QUESTION 35
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)

can have a maximum of 8 edge nodes

must have only active-active edge nodes

can have a maximum of 10 edge nodes

can contain multiple types of edge nodes (VM or bare metal)

must contain only one type of edge nodes (VM or bare metal)

Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-

NEW QUESTION 36
Which CLI command shows syslog on NSX Manager?

show log manager follow

get log-file auth.log

get log-file syslog

/var/log/sysloq/syslog.log

https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E3D-92AFB9D5E973.html

NEW QUESTION 37
Where do you configure the VLANs used in VRF Lite? (Choose two.)

uplink interface of the default Tier-0 gateway

uplink interface of the VRF gateway

downlink interface of the default Tier-0 gateway

segment connected to the Tier-1 gateway

uplink trunk segment

In VRF Lite configuration, VLANs are configured on the uplink interfaces of both the default Tier-0 gateway and the VRF gateway. The default Tier-0 gateway is responsible for routing between the different VRFs, while the VRF gateway is responsible for routing within a specific VRF. Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/nsxt_31_admin_guide/GUID-1F07C737-DA0A-46E9-9ED9-C7D8C6DA3F7B.html

NEW QUESTION 38
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

esxcli network diag ping -H <destination IP address>

vmkping ++netstack=geneve -d -s 1572 <destination IP address>

vmkping ++netstack=vxlan-d -s 1572 <destination IP address>

esxcli network diag ping -I vmk0 -H <destination IP address>

Explanation
https://kb.vmware.com/s/article/1003728

Loading …

VMware 2V0-41.20 certification exam is a comprehensive assessment of an individual’s knowledge and skills in managing and administering VMware NSX-T Data Center solutions. Professional VMware NSX-T Data Center certification is designed for professionals who work with NSX-T Data Center in complex enterprise environments. 2V0-41.20 exam tests candidates on topics such as installation, configuration, and management of NSX-T Data Center components, including logical switching, routing, and security.

Pass VMware 2V0-41.20 Actual Free Exam Q&As Updated Dump: https://www.passtestking.com/VMware/2V0-41.20-practice-exam-dumps.html

Categories:2V0-41.20VMware