220-1101 Dumps PDF 2024 Program Your Preparation EXAM SUCCESS [Q134-Q156]

5/5 - (3 votes)

220-1101 Dumps PDF 2024 Program Your Preparation EXAM SUCCESS

Get Perfect Results with Premium 220-1101 Dumps Updated 582 Questions

CompTIA 220-1101 exam is ideal for individuals who are looking to start a career in the IT industry. 220-1101 exam is also suitable for professionals who have experience in the field and want to enhance their skills and knowledge. Additionally, this certification is beneficial for individuals who are looking to advance their careers in IT support, help desk, and technical support roles.

CompTIA A+ certification program is an industry-standard certification that is recognized by employers around the world. The CompTIA 220-1101 Exam is the first exam in this certification program, and passing 220-1101 exam is an important step towards becoming a qualified IT professional. 220-1101 exam is designed to test the foundational knowledge and skills required for IT professionals at an entry-level, and passing the exam demonstrates a solid understanding of the concepts covered. Overall, the CompTIA 220-1101 Exam is an important exam for those seeking to enter the IT industry and is a valuable certification for IT professionals looking to advance their careers.

NO.134 A technician verifies the slow boot time and slow OS performance of a tower server with a RAID 5 on a PCIe RAID card that does not support hot swapping. Which of the following steps should the technician take NEXT to verify RAID health?

Verify S.M.A.R.T. operation on the RAID card.

Replace the failed drive while users are connected

Physically clean the HDDs and connectors.

Shut down the server and check the RAID controller’s status.

NO.135 A technician is replacing a computer with a connected point-of-sale system using a 9-pin serial adapter. The new computer does not have a 9-pin serial port. Which of the following ports can an adapter be installed on in order to connect to the point-of-sale system?

HDMI

Bluetooth

USB

Lightning

NO.136 A user’s mobile phone gets really hot to the touch and does not retain a charge. The user also reports that the phone is very slow, especially while charging. Which of the following is MOST likely causing these symptoms?

Broken charging port

Digitizer failure

CPU overheating

Defective battery

NO.137 A technician needs to improve a workstation’s overall response time for frequently used applications and data without removing the current hard drive. Which of the following storage devices should the technician install to BEST accomplish the objective?

M.2

SAS

HDD

SCSI

NO.138 A user’s Windows computer started running slowly after the installation of a CAD program. The computer has intermittent timeouts and often has to be rebooted to restore functionally. The computer seems to work correctly if the application is not running. Which of the following should the technician do NEXT to help troubleshoot the issue? (Select TWO).

Replace the video card.

Research the requirements of the application.

Install a new case fun.

Run chkdsk on the HDD.

Check the Event Viewer logs.

Reinstall the application.

NO.139 A user tries to turn on a computer but gets the following error message: Bootable device not found. The computer had no issues yesterday Which of the following is the most likely reason for this error?

The HDD is malfunctioning.

The mouse and keyboard are not connected.

A misconfigured boot device is in the BIOS.

The network cable is unplugged

NO.140 A user on the marketing team uses various multimedia applications that consume a lot of memory. The user needs to install more RAM to run these applications effectively. When the user opens the computer case, the user sees four slots in two sets of colors. Which of the following memory types is MOST likely required?

Dual-channel

Triple-channel

Single-channel

Quad-channel

Error correction code RAM

NO.141 Using the output below:

Which of the following is the default gateway?

172.25.1.252

172.25.1.39

172.25.1.4

255.255.255.0

NO.142 Which of the following would be BEST reason to use a virtual machine as a sandbox?

To test new software in a safe environment

To increase the efficient use of computing resources

To run multiple machines on the same hardware

To have dedicated hardware for a single system

NO.143 A bank wants to leverage cloud computing but would like a cloud solution in which infrastructure is shared with businesses in the same industry. Which of the following cloud models would BEST address the bank’s need?

Private

Hybrid

Public

Community

NO.144 A user takes a tablet to a technician because the cursor on it keeps drifting. The technician notices the screen does not appear to be damaged. Which of the following is the MOST likely cause of the cursor issue?

The screen is physically damaged.

The screen rotation is incorrect.

The touch-pen battery is depleted.

The screen needs to be recalibrated.

NO.145 A user takes a tablet to a technician because the cursor on it keeps drifting. The technician notices the screen does not appear to be damaged. Which of the following is the most likely cause of the cursor issue?

The screen is physically damaged.

The screen rotation is incorrect.

The touch-pen battery is depleted.

The screen needs to be recalibrated.

NO.146 A company laptop uses a docking station with an integrated NIC and is unable to access a wired SOHO network using DHCP. A technician runs ipconfig anddiscovers the laptop has an IPv4 assignment of
169.254.0.9. The NIC does not have any link or activity lights on. Which of the following should the technician do next?

Restart the laptop in safe mode.

Replace the laptop.

Reboot the DHCP server.

Reset the network adapter.

Reseat the laptop in the docking station.

NO.147 A technician is receiving reports that the entire office sporadically loses network connectivity throughout the day. The technician determines the root cause to be EMI. Which of the following cable mediums would be the MOST cost effective without sacrificing system performance?

Coaxial

Shielded Cat 6

Plenum Cat 5e

Multimode fiber

NO.148 Which of the following is a valid use for PaaS?

Off-site backups

An application development environment

A virtual server installation and configuration model

A web application for asset management

NO.149 Which of the following connectors can be plugged into a Thunderbolt 3 port on a laptop?

USB-A

USB-C

miniUSB

microUS3

NO.150 Which of the following should the label on a network jack faceplate refer to?

MAC address

Patch panel port

Switch port in use

VLAN identification

NO.151 A technician is installing a power supply in a workstation that contains a high-end graphics card, a 3GHz processor, and two cooling fans. Which of the following specifications should the technician verify before installing the new power supply?

The wattage

The chassis ventilation

The motherboard’s firmware

The cables’ color coding

NO.152 Which of the following network devices is used to separate broadcast domains?

Switch

Wireless access point

Router

Hub

NO.153 A graphic designer wants to purchase a laptop that provides the most accurate color spectrum available when viewed from as many different angles as possible. Which is the following display types would best meet the graphic designer’s requirements?

LCD

lasma

OLED

VGA

NO.154 A technician is installing a wireless access point and is required to run all cabling and make patch cords if necessary.
INSTRUCTIONS
Part 1
For each cable type, click the (+) to select the appropriate connector and tool.
part 2
An access point was moved and no longer has connectivity. Connect the access point, patch panel, and switch by clicking the (+) to select the appropriate cable end for each corresponding location to create a link.
The link will be visible after making the second selection of each pair.
Cable ends may be used multiple times, and all placeholders will be filled.

NO.155 A technician recently installed a new printer that is being shared over the network via a 64-bit Windows Print Server Two users, who have computers with a legacy OS, are unable to print to this new printer. Which of the following should the technician do to resolve this issue?

Enable 32-bit drivers on the Print Server.

Enable Print Spooler and restart the computer.

Run Windows Update on the users’ computers_

Update the computers to a 64-bit driver.

The correct answer is
A) Enable 32-bit drivers on the Print Server.
A print server is a computer or device that manages the printing requests from multiple clients over a network. A print server can share one or more printers with different types of clients, such as Windows, Mac, or Linux. However, to ensure compatibility and functionality, the print server must have the appropriate drivers for each printer and each client1.
A driver is a software component that enables the communication and interaction between a device and an operating system. A driver must match the specifications and features of the device, as well as the architecture and version of the operating system. A driver that is incompatible with either the device or the operating system may cause errors, malfunctions, or performance issues2.
In this scenario, the technician installed a new printer that is being shared over the network via a 64-bit Windows Print Server. This means that the print server has a 64-bit operating system and a 64-bit driver for the printer. However, two users who have computers with a legacy OS (an older or outdated operating system) are unable to print to this new printer. This may be because their computers have a 32-bit operating system and require a 32-bit driver for the printer.
To resolve this issue, the technician should enable 32-bit drivers on the Print Server. This means that the technician should install and configure a 32-bit driver for the printer on the print server, in addition to the existing 64-bit driver. This way, the print server can support both 64-bit and 32-bit clients, and allow them to print to the same printer34.
To enable 32-bit drivers on a Windows Print Server, the technician can follow these steps4:
On the print server, open Control Panel and select Devices and Printers.
Right-click on the printer that needs a 32-bit driver and select Printer Properties.
Click on the Sharing tab and check the box that says Share this printer.
Click on Additional Drivers and check the box that says x86 (for 32-bit).
Click OK and follow the instructions to install and configure the 32-bit driver.
For more information about print servers, drivers, and compatibility issues, you can refer to the following web search results: What is a Print Server?, What is a Device Driver?, How to Install Additional Drivers for Shared Printers, How to Enable 32-Bit Drivers on Windows Server.

NO.156 A user on a SOHO network is unable to watch online videos, even at 240 pixels. The technician runs ipconfig from the user’s computer and records the following:

The technician then connects a test laptop to the router via the user’s Cat 5 cable and records the following information:

Which of the following is MOST likely causing the user’s issue?