Feb-2024 New Version HPE2-W09 Certificate & Helpful Exam Dumps is Online [Q45-Q69]

Published date February 5, 2024

Rate this post

Feb-2024 New Version HPE2-W09 Certificate & Helpful Exam Dumps is Online

HPE2-W09 Free Certification Exam Material with 132 Q&As

NEW QUESTION 45
Switch-1 and Switch-2 are AruDaOS-CX switches, which are part of a Virtual Switching Extension (VSX) fabric. Switch-2 is the primary member. Switch-2 experiences a power failure while Switch-1 remains up. Switch-2’s power recovers, and Switch-2 reboots.
Is this one of the things that happens when Switch-2 finishes booting?
Solution: Switch-1 downloads its MAC forwarding table from Switch-2.

Yes

Switch-1 does not download its MAC forwarding table from Switch-2 when Switch-2 finishes booting. Switch-1 and Switch-2 are part of a VSX fabric, which is a high availability solution that provides redundancy and load balancing across a pair of switches1. When Switch-2 experiences a power failure, Switch-1 takes over the role of the primary member and continues to forward traffic1. When Switch-2 recovers, it synchronizes its configuration and state information from Switch-1, not the other way around1. The MAC forwarding table is part of the state information that is synchronized from the primary to the secondary member1.

NEW QUESTION 46
Is this how you should position switches in the ArubaOS-CX portfolio for data center networks?
Solution: Deploy Aruba 8400 switches as data center leaf switches.

Yes

The ArubaOS-CX portfolio for data center networks consists of different switches for different roles. The Aruba 8400 switches are designed for the core and aggregation layers, while the Aruba CX 6300 and CX 6400 switches are designed for the leaf layer1. Therefore, deploying Aruba 8400 switches as data center leaf switches is not how you should position switches in the ArubaOS-CX portfolio for data center networks. Reference: https://www.arubanetworks.com/solutions/data-center-modernization/

NEW QUESTION 47
You are configuring Ethernet Ring Protection Switching (ERPS) on an ArubaOS-CX switch. Is this a guideline for configuring timers?
Solution: The wait to restore timer (WTR) Is set in units of minutes; you can set it to prevent frequent topology changes due to a link going up and down.

Yes

NEW QUESTION 48
Is this a way that Virtual Switching Extension (VSX) differs from Virtual Switching Framework (VSF)?
Solution: VSX permits admins to select which features to synchronize between members while VSF requires manual configuration of Identical features on each member of the VSF fabric.

Yes

VSX permits admins to select which features to synchronize between members while VSF requires manual configuration of identical features on each member of the VSF fabric is a way that Virtual Switching Extension (VSX) differs from Virtual Switching Framework (VSF). VSX is a feature that provides active-active forwarding and redundancy for ArubaOS-CX switches. VSF is a feature that provides active-standby forwarding and redundancy for legacy campus switches. VSX allows admins to select which features to synchronize between members using an opt-in model, while VSF requires manual configuration of identical features on each member using a commander-member model1.

NEW QUESTION 49
Is this correct positioning of AtubaOS-CX switches in the data center?
Solution: Aruba CX 8325 switches are an appropriate choice for leaf switches in a leaf-spine topology that uses Virtual Extensible LAN (VXLAN) with Ethernet VPN (EVPN).

Yes

Aruba CX 8325 switches are an appropriate choice for leaf switches in a leaf-spine topology that uses Virtual Extensible LAN (VXLAN) with Ethernet VPN (EVPN) is a correct positioning of ArubaOS-CX switches in the data center. The Aruba CX 8325 switches are designed for data center spine or core roles, but they can also be used as leaf switches in a VXLAN with EVPN scenario. They support advanced features such as VSX, EVPN, and PFC that enable high performance, scalability, and resiliency for data center networks1.

NEW QUESTION 50
Refer to the exhibit.

You need to set up an ArubaOS-CX switch to implement Virtual Extensible LAN (VXLAN) WITHOUT Ethernet VPN (EVPN). The exhibit Indicates which servers should be part of the same VXLANs and the desired VNls for the VXLANs. Assume that the network is already configured to permit each ArubaOS-CX switch to reach each other switch’s loopback interface.
Is this part of the process for setting up VXLAN to meet the requirements?
Solution: On Switch-1, create two VXLAN interfaces, one with ID 5010 and one with 1D 5020; both VXLAN interfaces should use 192.168.1.1 as the source IP address.

Yes

VXLAN is a feature of ArubaOS-CX that provides layer 2 connectivity between networks across an IP network1. VXLAN uses a 24-bit identifier called VXLAN Network Identifier (VNI) to segment the layer 2 domain1. VXLAN also uses a tunnel endpoint (VTEP) to encapsulate and decapsulate VXLAN packets1. A VXLAN interface is a logical interface that represents a VNI and is associated with a source IP address and a VRF1. To set up VXLAN without EVPN, you need to create VXLAN interfaces on each switch and configure static VTEP peers1. Based on the exhibit, Switch-1 needs to create two VXLAN interfaces, one with ID 5010 and one with ID 5020, to match the VNIs of the servers connected to it. Both VXLAN interfaces should use 192.168.1.1 as the source IP address, which is the loopback interface of Switch-1. Therefore, this is part of the process for setting up VXLAN to meet the requirements, and the correct answer is yes. For more information on VXLAN and EVPN, refer to the Aruba Data Center Network Specialist (ADCNS) certification datasheet2 and the EVPN VXLAN Guide for your switch model1.

NEW QUESTION 51
Does this correctly describe how the Virtual Switching Extension (VSX) fabric reacts to various component failure scenarios?
Solution: The keepalive goes down, ISL link remains up. Switch-1 and Switch-2 remains up. The Split-recovery mode is disabled. In this case the secondary switch shutdowns Svls.

Yes

NEW QUESTION 52
You want to use NetEdit to configure an AtubaOS-CX switch.
Is this a minimum requirement for setting up communications between the switch and NetEdit?
Solution: Make sure that the SSH server is enabled.

Yes

The solution is correct because making sure that the SSH server is enabled is a minimum requirement for setting up communications between the switch and NetEdit. NetEdit uses SSH to establish a secure connection to the switch and execute commands on it. Therefore, making sure that the SSH server is enabled is necessary for setting up communications between the switch and NetEdit.

NEW QUESTION 53
Is this something that NetEdit 2.0 does after it discovers a switch?
Solution: It enables SNMP on the switch, if disabled.

Yes

NetEdit 2.0 is a network management tool that allows you to configure, monitor, and troubleshoot ArubaOS-CX switches. NetEdit 2.0 can discover switches using different methods, such as IP range scan, LLDP neighbors, or manual entry. After it discovers a switch, NetEdit 2.0 does not enable SNMP on the switch, if disabled. SNMP is a protocol that allows NetEdit 2.0 to collect information and statistics from the switches, but it is not required for discovery or management. NetEdit 2.0 can use other protocols, such as REST API or SSH, to communicate with the switches1. Therefore, this is not something that NetEdit 2.0 does after it discovers a switch.

NEW QUESTION 54
Does this correctly describe the ArubaOS-CX architecture?
Solution: The AtubaOS-CX software is based on the ArubaOS-Switch software and adds data center features.

Yes

NEW QUESTION 55
Is this a use case for deploying Ethernet Ring Protection Switching (ERPS)?
Solution: extending Layer 2 communications between data centers that connect over Layer 3 MPLS links

Yes

NEW QUESTION 56
Refer to the exhibit.

which shows the topology tot an Ethernet Ring Protection Switching (ERPS) solution.
Is this a valid design for the control and protected VLANs on the VSX fabric 1 switches?
Solution: Ring 1, instance 1:
control VLAN: 1000protected VLANs: 51-135 Ring l,Instance2:
control VLAN: 1001 protected VLANs: 136-220 Ring 2, Instance 1: control VLAN: 1000 protected VLANs: 181 -200 Ring 2, Instance 2: control VLAN: 1003 protected VLANs: 201 -220

Yes

Ring 1, instance 1: control VLAN: 1000protected VLANs: 51-135 Ring l,Instance2: control VLAN: 1001 protected VLANs: 136-220 Ring 2, Instance 1: control VLAN: 1000 protected VLANs: 181 -200 Ring 2, Instance 2: control VLAN: 1003 protected VLANs: 201 -220 is not a valid design for the control and protected VLANs on the VSX fabric 1 switches for an Ethernet Ring Protection Switching (ERPS) solution. The control VLANs must be unique for each ring instance and must not overlap with any protected VLANs. In this design, the control VLAN 1000 is used for both ring 1 instance 1 and ring 2 instance 1, which can cause conflicts and errors. Also, the protected VLANs 181-220 are used for both ring instances on ring 2, which can cause loops and traffic duplication2.

NEW QUESTION 57
Is this a use case for disabling split-recovery mode on ArubaOS-CX switches in a Virtual Switching Extension (VSX) fabric?
Solution: You want an admin to manually fail traffic over to the secondary member if the primary member fails.

Yes

Virtual Switching Extension (VSX) is a high-availability technology that allows two ArubaOS-CX switches to operate as a single logical device. Split-recovery mode is a feature that prevents traffic loss when the Inter-Switch Link (ISL) goes out-of-sync and keepalive subsequently fails. When split-recovery mode is enabled, the secondary VSX member disables its downstream links until it synchronizes with the primary member. When split-recovery mode is disabled, the secondary VSX member keeps its downstream links up even when it is out-of-sync with the primary member1. Disabling split-recovery mode is a use case for situations where you want an admin to manually fail traffic over to the secondary member if the primary member fails. This can be useful for planned maintenance or testing purposes, where you want to avoid automatic failover and failback of traffic. To manually fail traffic over to the secondary member, you need to shut down the ISL on both VSX members1. Therefore, this is a valid use case for disabling split-recovery mode on ArubaOS-CX switches in a VSX fabric.

NEW QUESTION 58
Is this a use case for implementing Enhanced Transmission Selection (ETS) on an ArubaOS-CX switch?
Solution: to help the switch to look inside tunneled traffic and apply different quality of service (QoS) settings to different types of traffic

Yes

To help the switch to look inside tunneled traffic and apply different quality of service (QoS) settings to different types of traffic is not a use case for implementing Enhanced Transmission Selection (ETS) on an ArubaOS-CX switch. ETS is a feature that provides bandwidth allocation and priority assignment for different traffic classes based on IEEE 802.1Qaz standard. ETS does not help the switch to look inside tunneled traffic, but rather relies on the priority values in the outer header of the tunneled traffic to apply QoS settings. A better way to help the switch to look inside tunneled traffic and apply different QoS settings to different types of traffic would be to use deep packet inspection (DPI) or application visibility and control (AVC) features.

NEW QUESTION 59
Is this a difference between a typical data center network’s requirements and a typical campus network’s requirements?
Solution: Data center networks are typically less oversubscribed than campus networks.

Yes

NEW QUESTION 60
Refer to the exhibit.

which shows the topology tot an Ethernet Ring Protection Switching (ERPS) solution.
Is this a valid design for the control and protected VLANs on the VSX fabric 1 switches?
Solution: Ring 1, instance 1:
control VLAN: 1000protected VLANs: 51-135 Ring l,Instance2:
control VLAN: 1001 protected VLANs: 136-220 Ring 2, Instance 1: control VLAN: 1000 protected VLANs: 181 -200 Ring 2, Instance 2: control VLAN: 1003 protected VLANs: 201 -220

Yes

NEW QUESTION 61
Does this correctly describe Network Analytics Engine (NAE) limitations on ArubaOS-CX switches?
Solution: You can run NAE with VSX, but only the primary VSX member will actually run agents during normal operation.

Yes

Network Analytics Engine (NAE) is a built-in analytics framework for network assurance and remediation on ArubaOS-CX switches. NAE allows monitoring, troubleshooting, and proactive network management using scripts and agents. Virtual Switching Extension (VSX) is a high-availability technology that allows two ArubaOS-CX switches to operate as a single logical device. You can run NAE with VSX, but only the primary VSX member will actually run agents during normal operation. The secondary VSX member will only run agents if the primary member fails or is rebooted1. Therefore, this correctly describes NAE limitations on ArubaOS-CX switches.

NEW QUESTION 62
Refer to the exhibits.

Is this how the switch handles the traffic?
Solution: A frame with destination MAC address, 00:50:56:00:00:03 arrives with a VLAN 10 tag on 1/1//1 on Switch-1. Switch-1 switches the frame out interface 1/1/2 without VXLAN.

Yes

VXLAN is a tunneling protocol that encapsulates layer 2 traffic over an IP network using VXLAN Network Identifiers (VNIs) to identify different layer 2 segments. VXLAN Tunnel Endpoints (VTEPs) are devices that perform the encapsulation and decapsulation of VXLAN packets. According to the exhibit, Switch-1 and Switch-2 are VTEPs that use VNI 10010 to map VLAN 10 traffic. Therefore, when Switch-1 receives a frame with destination MAC address 00:50:56:00:00:03 and VLAN 10 tag on interface 1/1/1, it should encapsulate the frame with a VXLAN header that contains VNI 10010 and send it as a unicast packet to Switch-2’s loopback address (10.1.1.2) over the IP network1. Switch-1 should not switch the frame out interface 1/1/2 without VXLAN, as this would violate the VNI mapping and cause layer 2 loops. Therefore, this is not how the switch handles the traffic. https://networklessons.com/cisco/ccnp-encor-350-401/introduction-to-virtual-extensible-lan-vxlan

NEW QUESTION 63
Two ArubaOS-CX switches ate part of a Virtual Switching Extension (V5X) fabric. Is this a guideline for configuring the switches’ link-up delay settings?
Solution: Set the link-up delay timer based on the number of MAC forwarding, ARP, and routing table entries.

Yes

NEW QUESTION 64
Is this part of a valid strategy for load sharing traffic across the links in an Ethernet Ring Protection Switching (ERPS) ring?
Solution: Implement Virtual Switching Extension (VSX) on pairs of ERPS switches at the same site. Then combine multiple links between two data centers into VSX LAGs (M-LAGs).

Yes

NEW QUESTION 65
Is this a requirement for implementing Priority Flow Control (PFC) on an ArubaOS-CX switch interface?
Solution: configuring trust of Cos on the interface

Yes

NEW QUESTION 66
Is this how you should position switches in the ArubaOS-CX portfolio for data center networks?
Solution: Deploy Aruba 83xx switches as core switches for very large three-tier data center networks.

Yes

Deploying Aruba 83xx switches as core switches for very large three-tier data center networks is how you should position switches in the ArubaOS-CX portfolio for data center networks. The Aruba 83xx switches are designed for data center spine or core roles, and they provide high performance, scalability, and resiliency. They can support very large three-tier data center networks with up to 512 leaf switches using VSX2.

NEW QUESTION 67
Your customer is using Nutanix AHV and they need a network orchestration tool to simplify network provisioning. Is this operation supported when Aruba Fabric Composer (AFC) is integrated with Nutanix?
Solution: Automated configuration of Layer 3 MP-BGP protocol on leaf switches

Yes

Automated configuration of Layer 3 MP-BGP protocol on leaf switches is not an operation supported when Aruba Fabric Composer (AFC) is integrated with Nutanix. AFC is a tool that provides automation and orchestration for managing data center networks composed of ArubaOS-CX switches. AFC can integrate with various data center software such as VMware vSphere, Nutanix AHV, Microsoft Hyper-V, etc. AFC can discover, monitor, and configure Nutanix AHV clusters and hosts using REST APIs. However, AFC does not support the configuration of Layer 3 MP-BGP protocol on leaf switches, which is required for EVPN VXLAN networks. AFC only supports the configuration of Layer 2 VXLAN networks without EVPN1.

NEW QUESTION 68
Is this a rule for configuring schedule profiles on an ArubaOS-CX switch?
Solution: If the profile mixes strict priority scheduling with another scheduling algorithm, the strict priority queue must be the highest numbered queue.

Yes

A schedule profile is a feature of ArubaOS-CX that determines the order and service of queues for transmission123. A schedule profile must be configured on every interface at all times23. The switch supports three scheduling algorithms: Guaranteed Minimum Bandwidth (GMB), Strict, and Strict EQS23. Strict scheduling gives absolute priority to a queue over other queues, regardless of the bandwidth allocation23. If the profile mixes strict priority scheduling with another scheduling algorithm, the strict priority queue must be the highest numbered queue23. Therefore, this is a rule for configuring schedule profiles on an ArubaOS-CX switch, and the correct answer is yes. For more information on schedule profiles and QoS, refer to the Aruba Data Center Network Specialist (ADCNS) certification datasheet1 and the QoS Guide for your switch model23.

NEW QUESTION 69
Is this a use case for implementing Enhanced Transmission Selection (ETS) on an ArubaOS-CX switch?
Solution: ensures a minimum bandwidth guarantee between two endpoints traffic with various 802.1 p values.

Yes

Loading …

Get The Important Preparation Guide With HPE2-W09 Dumps: https://www.passtestking.com/HP/HPE2-W09-practice-exam-dumps.html

Categories:HPE2-W09HP

Tags:HPE2-W09 latest study questions HPE2-W09 latest test dumps.zip HPE2-W09 new study questions ppt HPE2-W09 reliable real test HPE2-W09 test voucher HPE2-W09 valid braindumps

admin

HPE2-N69 / HP

Most UptoDate HP HPE2-N69 Exam Dumps PDF 2023 [Q25-Q40]
HPE6-A73 / HP

Latest [Dec 24, 2022] HPE6-A73 Exam with Accurate Aruba Certified Switching Professional Exam PDF Questions [Q25-Q47]
HPE0-V17 / HP

Jun-2022 FREE HP HPE0-V17 PRACTICE QUESTIONS AND ANSWERS UPDATES [Q41-Q57]
HPE0-V26 / HP

[Q20-Q34] Easily To Pass New HPE0-V26 Premium Exam Updated [Jan 05, 2024]
HP2-I47 / HP

HP2-I47 Certification – Valid Exam Dumps Questions Study Guide! (Updated 32 Questions) [Q16-Q33]
HPE2-W07 / HP

Practice Examples and Dumps & Tips for 2022 Latest HPE2-W07 Valid Tests Dumps [Q89-Q107]