Home > C_S43_2022 / SAP

100% Free Real Updated C_S43_2022 Questions & Answers Pass Your Exam Easily [Q11-Q28]

Published date July 28, 2024

Rate this post

100% Free Real Updated C_S43_2022 Questions & Answers Pass Your Exam Easily

Easily To Pass New C_S43_2022 Verified & Correct Answers

QUESTION 11
Which settings must be customized to set up Inspection Checklist processing? Note: There are 2 correct answers to this question

Maintain settings at plant level for usage decisions.

Create a control key which expects inspection characteristic assignments

Assign an Inspection Type to a Maintenance Order Type and a Planning Plant

Assign an Inspection Type to a Maintenance Order Type.

To set up Inspection Checklist processing, you need to customize the following settings:
Maintain settings at plant level for usage decisions. This is required to define the default values for the usage decision codes and the follow-up actions for the inspection lots. You can do this by using the customizing activity ‘Default Setting at Plant Level’ under ‘Quality Management→Quality Inspection→Inspection Lot Completion→Maintain Default Values for Usage Decisions’1.
Assign an Inspection Type to a Maintenance Order Type and a Planning Plant. This is required to enable the creation of inspection lots for the maintenance orders. You can do this by using the customizing activity ‘Assign Inspection Type to Maintenance Order Type’ under ‘Plant Maintenance and Customer Service→Maintenance and Service Processing→Maintenance and Service Orders→Functions and Settings for Order Types→Assign Inspection Type to Maintenance Order Type’2.
You do not need to create a control key which expects inspection characteristic assignments or assign an Inspection Type to a Maintenance Order Type only. These are not relevant settings for the Inspection Checklist processing. Reference:
Set up your SAP S/4HANA system for EAM Inspection Checklists
Explaining Inspection Checklists – SAP Learning

QUESTION 12
Which scheduling parameters are used in a multiple-counter plan? Note: There are 2 correct answers to this question.

Scheduling period

Start date

Scheduling indicator

Factory calendar

QUESTION 13
Which views can you assign to an equipment category via a view profile? Note: There are 2 correct answers to this question?

Warranty

Configuration

Serial data

Manufacturer data

An equipment category defines the technical characteristics of an equipment and the views that are available for it. A view profile is a set of views that can be assigned to an equipment category. The views that can be assigned to an equipment category via a view profile are:
Basic data
Classification
Location
Organization
Partner
Status
Structure
Warranty
Manufacturer data
Measurement document
History
Permits
Documents
User fields
Serial data
Configuration
Object links
Time-dependent data
Linear data
Geographical data
Maintenance plan
Maintenance item
Maintenance task list
Maintenance order
Maintenance notification
Service order
Service notification
Service contract
Service confirmation
Service quotation
Service request
Service plan
Service item
Service task list
Service product
Service product allocation
Service product structure
Service product location
Service product partner
Service product status
Service product classification
Service product documents
Service product permits
Service product user fields
Service product serial data
Service product configuration
Service product object links
Service product time-dependent data
Service product linear data
Service product geographical data
Among these views, the ones that match the options given in the question are Warranty and Manufacturer data. Therefore, the correct answers are A and D.
References:
SAP Help Portal – Equipment Category
SAP Help Portal – View Profile

QUESTION 14
Which activities can the planner perform by using the Maintenance Planning Overview app with the default filters? Note: There are 3 correct answers to this question?

Display approved purchase requisitions for which purchase orders have been generated.

Display approved purchase requisitions for which NO purchase orders have been generated

Analyze overdue maintenance orders that have NOT been finally confirmed

Analyze confirmed maintenance orders that have NOT been settled.

Analyze maintenance orders that are still in planning and have NOT been released.

The Maintenance Planning Overview app allows the planner to analyze critical factors in a chosen reference period, such as outstanding notifications, maintenance orders, purchase requisitions, and purchase orders. The app displays the data in multiple cards that show the number of objects and their status. The planner can use the default filters or adapt them according to their needs.
The activities that the planner can perform by using the app with the default filters are:
Display approved purchase requisitions for which NO purchase orders have been generated. This is shown in the card “Purchase Requisitions Not Released” which displays the number of purchase requisitions that have been approved but not converted into purchase orders. The planner can navigate to the list of purchase requisitions and take further actions, such as creating purchase orders or changing the requirement date.
Analyze overdue maintenance orders that have NOT been finally confirmed. This is shown in the card “Overdue Orders” which displays the number of maintenance orders that have been released but not completed within the planned end date. The planner can navigate to the list of overdue orders and check the status of the operations, confirmations, and goods movements.
Analyze maintenance orders that are still in planning and have NOT been released. This is shown in the card “Orders in Planning” which displays the number of maintenance orders that have not been released for execution. The planner can navigate to the list of orders in planning and complete the planning activities, such as assigning task lists, materials, and resources.
The activities that the planner cannot perform by using the app with the default filters are:
Display approved purchase requisitions for which purchase orders have been generated. This is not shown in any of the cards in the app. The planner can use the app “Manage Purchase Requisitions” to display this information.
Analyze confirmed maintenance orders that have NOT been settled. This is not shown in any of the cards in the app. The planner can use the app “Maintenance Order Costs Analysis” to display this information.
Reference:
SAP S/4HANA : New app in Plant Maintenance (Asset Management) – Maintenance Planning Overview Highlights for Asset Management in SAP S/4HANA 2021 Maintenance Management | SAP Help Portal

QUESTION 15
How does a performance-based maintenance plan calculate the interval between start date and planned date?

Cycle length divided by (monthly performance x 12)

Cycle length divided by annual performance

Cycle length divided by ((scheduling period) x (cycle modification factor))

Cycle length divided by (annual performance/365)

Explanation
A performance-based maintenance plan calculates the interval between start date and planned date by dividing the cycle length by the annual performance. The cycle length is the time or counter reading that is required for one maintenance cycle. The annual performance is the estimated time or counter reading that the object will achieve in one year. For example, if the cycle length is 100 hours and the annual performance is 2000 hours, then the interval is 100/2000 = 0.05 years or 18.25 days. References:
Asset Management in SAP S/4HANA Cloud 2208 | SAP Blogs, section “Final Due Date in Maintenance Orders Based on the Compliance Calculation Method (+ demo)” Highlights for Asset Management in SAP S/4HANA 2021 | SAP Blogs, section “Final Due Date, offered via business function LOG_EAM_IME_1” SAP Help Portal: Maintenance Plan

QUESTION 16
You require stock material to carry out maintenance tasks. What do you have to consider regarding material planning in the maintenance order? Note: There are 2 correct answers to this question?

Material can be assigned at the order header level.

For stock material you always need a reservation

A goods issue can be entered for planned and unplanned material

The pick list for materials can be printed before order release.

QUESTION 17
Which objects can you assign to a Maintenance Service Order Item? Note: There are 2 correct answers to this question.

Service Product

DIP Profile

Service Work Center

Service Master Record

Explanation
A maintenance service order item can be assigned to a service product and a service master record. A service product is a material that represents a service that is offered or performed by the service provider. A service master record is a master data object that contains information about the service, such as description, unit of measure, price, and validity period. A service product and a service master record are linked by the service material number. A maintenance service order item can also be assigned to a service master record directly, without a service product. This is useful when the service is not part of the service provider’s catalog, but is requested by the customer on an ad-hoc basis. A DIP profile and a service work center are not objects that can be assigned to a maintenance service order item. A DIP profile is a configuration object that defines how the costs and revenues of a service order item are determined and transferred to billing. A service work center is amaster data object that represents a person, a group of persons, or a technical resource that performs a service activity. A DIP profile and a service work center are assigned to the maintenance service order header, not to the item level. References:
Maintenance Service Order
Service Product
[Service Master
Record](https://help.sap.com/docs/SAP_S4HANA_ON-PREMISE/3757ad8f98484812b58947bb8e6a2663

QUESTION 18
Which options do you have in SAP S/4HANA Asset Management, Public Cloud Edition? Note: There are 2 correct answers to this question

You can configure SAP S/4HANA Cloud via the self-service configuration UI.

You have access to the SAP S/4HANA back-end system

You can configure SAP S/4HANA Cloud via the SAP Asset Intelligence Network

You do NOT have access to the SAP S/4HANA back-end system.

QUESTION 19
Which activities can the planner perform by using the Maintenance Planning Overview app with the default filters? Note: There are 3 correct answers to this question?

Display approved purchase requisitions for which purchase orders have been generated.

Display approved purchase requisitions for which NO purchase orders have been generated

Analyze overdue maintenance orders that have NOT been finally confirmed

Analyze confirmed maintenance orders that have NOT been settled.

Analyze maintenance orders that are still in planning and have NOT been released.

QUESTION 20
Which of the following is a prerequisite for external refurbishment?

Define the order type for external refurbishment.

Select the material group for externally refurbished materials.

Assign an external work center to a maintenance order operation

Activate the subcontracting indicator in an external activity.

Explanation
External refurbishment is the process of sending defective or worn-out spare parts to an external vendor for repair or replacement. To carry out this process, you need to create a maintenance order with an external operation that has the subcontracting indicator activated. This indicator allows you to create a purchase requisition and a purchase order for the external service. The external operation also requires an external work center, a control key, and a material component with the valuation type of the defective part. The order type for external refurbishment is not a prerequisite, but a configuration option that can be used to differentiate the process from internal refurbishment. The material group for externally refurbished materials is not relevant for the process, as the material master data is not changed by the refurbishment. The assignment of an external work center to a maintenance order operation is necessary, but not sufficient, for external refurbishment. You also need to activate the subcontracting indicator in the external activity. References:
Explaining Refurbishment of Spare Parts, section “Refurbishing Spare Parts Externally” Refurbishment of Repairable Spares: Integration between SAP-PM and SAP-MM, section “4.2 External Refurbishment: Major Steps”

QUESTION 21
You want to create a single-cycle plan with a cycle of 12 months. You use the scheduling indicator Time-key date. The orders should be called 3 months before the planned date.How can you set up the maintenance plan? Note: There are 2 correct answers to this question

Set the call horizon to 25%.

Set the call horizon to 75%

Set the offset to 3 months

Set the call horizon to 90 days.

QUESTION 22
Which activities can the technician perform with the Report and Repair Malfunction SAPUI5 app? Note: There are 2 correct answers to this question

Schedule
* Dispatch

Release
* Print

Complete
* Close Report

Release
* Start Work

QUESTION 23
Which functions characterize a Strategic analysis as opposed to embedded analysis within the SAP S/4HANA core system? Note: There are 2 correct answers to this question

Preconfigured Core Data Service (CDS) containing SQL views

A collection of tools that are not included with core SAP S/4HANA

SAP Business Objects as a part of SAP Business Warehouse (BW)

SAP Business Objects Business Intelligence for Visualization

Explanation
Strategic analysis is a type of analysis that provides a high-level overview of the business performance and trends, as well as the ability to drill down into the details and performroot cause analysis. Strategic analysis is typically performed by business analysts or managers who need to make strategic decisions based on the data.
Strategic analysis requires a collection of tools that are not included with core SAP S/4HANA, such as SAP Analytics Cloud, SAP Business Planning and Consolidation, SAP Business Warehouse, and SAP Business Objects Business Intelligence. These tools enable the integration, transformation, modeling, and visualization of data from various sources, including SAP S/4HANA and other systems. Embedded analysis, on the other hand, is a type of analysis that provides real-time insights into the operational data within the SAP S/4HANA core system. Embedded analysis is typically performed by end users or operational managers who need to monitor and optimize the business processes and transactions. Embedded analysis relies on preconfigured Core Data Services (CDS) views that contain SQL views of the data in SAP S/4HANA. These views can be accessed by SAP Fiori apps, SAP Smart Business KPIs, or SAP Analysis for Microsoft Office. SAP Business Objects is not a part of SAP Business Warehouse, but a separate product that can connect to SAP Business Warehouse or other data sources. Therefore, option C is incorrect. References:
SAP S/4HANA Asset Management – Analytics, section “Strategic Analysis”
SAP S/4HANA Asset Management – Analytics, section “Embedded Analysis”
SAP S/4HANA Asset Management – Analytics, section “SAP BusinessObjects Business Intelligence”

QUESTION 24
You schedule a Maintenance Service Plan. Which call object is generated?

Maintenance Order which is linked to a Service Order Header

Customer Service Order with assigned DIP profile

Customer Service Order with an external order operation

Maintenance Order which is linked to a Service Order Item

QUESTION 25
You want to create a new functional location. Which selling is part of the Customizing for the functional location category? Note: There are 3 correct answers to this question

Warranty category

Usage period

Object information

Measuring point category

Status profile

Explanation
The Customizing for the functional location category includes the following settings: usage period, object information, and status profile.
The usage period defines the start and end dates of the functional location’s usage. It can be used to control the validity of maintenance plans and orders, and to calculate the age of the functional location. You can define the usage period in the Customizing activity Define Functional Location Categories1.
The object information defines the additional data that can be entered for the functional location, such as manufacturer, construction type, serial number, and equipment number. You can define the object information in the Customizing activity Define Functional Location Categories1.
The status profile defines the user statuses that can be assigned to the functional location. The user statuses can be used to control the business transactions that are allowed for the functional location, such as creating orders, notifications, or measuring documents. You can define the status profile in the Customizing activity Define Status Profile2.
References: 1: Define Functional Location Categories 2: Define Status Profile

QUESTION 26
You want to schedule a performance-based maintenance plan. Which parameters are mandatory? Note: There are 2 correct answers to this question

Scheduling period

Start counter reading

Estimated annual performance

Counter overflow reading

To schedule a performance-based maintenance plan, you need to specify the start counter reading and the estimated annual performance of the equipment or functional location. The start counter reading is the initial value of the counter assigned to the maintenance plan. The estimated annual performance is the expected value of the counter for one year. These parameters are used to calculate the maintenance cycle and the due date for the maintenance plan. The scheduling period and the counter overflow reading are optional

QUESTION 27
Which are the prerequisites for Inspection Checklist Processing? Note: There are 2 correct answers to this question

QM inspection plan with assigned inspection characteristics

Inspection point type assigned to the task list header

Master inspection characteristics assigned to PM task list operations

Classification data assigned to a technical object

This is required to define the inspection scope and the checklist type for the technical object. The inspection plan must be classified with the same class as the technical object and have matching characteristic values1.
Classification data assigned to a technical object: This is required to identify the relevant inspection plan and checklist type for the technical object. The technical object must be classified with the same class as the inspection plan and have matching characteristic values1.
The other options are not correct because:
Inspection point type assigned to the task list header: This is not a prerequisite for inspection checklist processing, but an optional setting that allows the user to define inspection points for the checklist items2.
Master inspection characteristics assigned to PM task list operations: This is not a prerequisite for inspection checklist processing, but an optional setting that allows the user to use master inspection characteristics as checklist items2.
Reference:
1: Explaining Inspection Checklists – SAP Learning 2: Generating Inspection Checklists | SAP Help Portal

QUESTION 28
Which component is used to display data in the Technical Object Breakdowns and Technical Object Damages app?

SAP Asset Strategy and Performance Management

SAP Lumira Designer

SAP S/4HANA Core Data Services

SAP Predictive Analysis

The Technical Object Breakdowns and Technical Object Damages app use SAP Lumira Designer to display data in a user-friendly and interactive way. SAP Lumira Designer is a tool that allows you to create analytical applications and dashboards based on SAP S/4HANA Core Data Services (CDS) views. SAP Asset Strategy and Performance Management and SAP Predictive Analysis are not components used to display data in this app, but they are other solutions that can help you optimize your asset management strategy and performance. References:
Technical Object Breakdowns
Technical Object Damages
[SAP Lumira Designer]

Loading …

SAP C_S43_2022 Exam Syllabus Topics:

Topic	Details
Topic 1	Organizational Units and Master Data Describe and implement the process of breakdown maintenance using traditional
Topic 2	Describe and implement the necessary organizational units Time-based strategy and performance-based strategy maintenance plans
Topic 3	Describe UI technologies and client types used with SAP S 4HANA Asset Management Maintenance Processing – Advanced Functions
Topic 4	Describe the options for preventive maintenance using task lists User Interface and Mobile Maintenance
Topic 5	Describe and implement the process of corrective maintenance using traditional Describe and implement technical asset structures following fundamental concepts

Free C_S43_2022 Exam Files Downloaded Instantly: https://www.passtestking.com/SAP/C_S43_2022-practice-exam-dumps.html

Categories:C_S43_2022SAP

Tags:C_S43_2022 Exam Questions C_S43_2022 fresh dumps C_S43_2022 new examcollection C_S43_2022 reliable exam camp free C_S43_2022 reliable study questions free download C_S43_2022 Standard Answers C_S43_2022 valid study guide ppt C_S43_2022 visual cert test

admin

C_S4CPS_2302 / SAP

[Apr 05, 2023] Latest C_S4CPS_2302 PDF Dumps & Real Tests Free Updated Today [Q13-Q28]
C-ARSUM-2308 / SAP

[Q34-Q56] Latest C-ARSUM-2308 Practice Test Questions Verified Answers As Experienced in the Actual Test!
C_SAC_2215 / SAP

Get Real C_SAC_2215 Quesions Pass SAP Certification Exams Easily [Q74-Q96]
C_BW4H_211 / SAP

GET Real SAP C_BW4H_211 Exam Questions With 100% Refund Guarantee Dec 07, 2023 [Q23-Q37]
E-S4CPE-2023 / SAP

Actual E-S4CPE-2023 Exam Recently Updated Questions with Free Demo [Q33-Q54]
C-S4PPM-2021 / SAP

Valid C-S4PPM-2021 Test Answers & SAP C-S4PPM-2021 Exam PDF [Q36-Q56]