300-810 Free Study Guide! with New Update 162 Exam Questions [Q52-Q71]

Rate this post

300-810 Free Study Guide! with New Update 162 Exam Questions

Get up-to-date Real Exam Questions for 300-810 UPDATED [2023]

NO.52 Refer to the exhibit.

A customer reports that after a network failure, all of the Cisco Jabber clients are not switched back to their home nodes. An engineer determines that the primary Cisco IM&P server is in Failed Over state. Which two actions should be performed to bring the system back to operational state and to prevent future occurrences?
(Choose two.)

Advise all users to re-login to their Jabber clients.

Confirm that both IM&P servers are configured in the Presence Redundancy Group configuration pane.

Perform a restart of the IM&P primary server to force fallback.

Click the Fallback button in the Server Action pane.

Set the Automatic Failover parameter in the Server Recovery Manager Service Parameters to the value True.

NO.53 SAML SSO is enabled in Cisco Unified Communications Manager. What happens when a browser-based client attempts to access a protected resource on a service provider?

The browser follows the redirect and issues an HTTPS GET request to the IdP.

The IdP checks for a valid browser session.

The service provider generates a SAML authentication request.

The SAML request is maintained as a query parameter in the GET request.

NO.54 When Cisco IM and Presence is configured to use automatic fallback, how long does the Server Recovery Manager service wait for a failed service/server to remain active before an automatic fallback is initiated?

10 minutes

20 minutes

30 minutes

1 hour

NO.55 Which two methods does Cisco Jabber use for contact searching in an on-premises deployment model? (Choose two.)

HTTP

XMPP

UDS

LDAP

SIP

NO.56 In the integration of Cisco Unity Connection using SIP, which SIP trunk security profile option is required for MWI to work correctly?

Accept out-of-dialog refer

Accept replaces header

Accept unsolicited notification

Accept presence subscription

NO.57 An engineer needs to configure the cisco unity connection Auto-attendant feature to transfer calls to a specific destination, maintain control of the transfer, and take a defined administrative action upon failure. How is this accomplished?

Consult Transfer

Supervised Transfer

Release to Switch

HookFlash Transfer

NO.58 Refer to the exhibit.

Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?

Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode.

Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy.

These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores.

The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.

NO.59 Refer to the exhibit.

A Jabber user is unable to access voicemail. During troubleshooting, an administrator captures this screenshot. What are the two ways to resolve this issue? (Choose two.)

Ask the user to click on the “Connect to a device” button and use the correct username and password.

Ensure the user is not locally created on Cisco Unity Connection with a password expiring separately from the password that is used for Jabber.

Make sure the Jabber service profile created in Cisco UCM contains Unity Connection UC service with a voicemail server configured.

Ask an administrator to create an account for this user in Cisco Unity Connection but remove the Unity Connection UC service from the Cisco UCM Jabber service profile.

Check if “OAuth with Refresh Login Flow” is enabled on Cisco Unity Connection but disabled in Cisco UCM.

NO.60 Refer to the exhibit.

When troubleshooting an internal Jabber login problem, there is a pop-up about a certificate error, and then the login fails. The FQDN of Cisco UCM is cucm.ex.com, and the FQDN of the IM and Presence Server is imp.ex.com. Which two actions should be taken to fix this issue? (Choose two.)

Sign the Cisco UCM CallManager certificate with a trusted certificate authority.

Import the Cisco UCM CallManager certificate into the Trusted Certificate Authorities on the PC running Jabber.

Sign the Cisco UCM tomcat certificate with a trusted certificate authority.

Sign the Cisco Unified IM and Presence server cup certificate with a trusted certificate authority.

Import the certificate of cucm.ex.com into the Trusted Certificate Authorities on the PC running Jabber.

NO.61 An engineer deploys Centralized Deployment for Cisco IM and Presence, where central IM and Presence runs version 12.0, and remote Cisco UCM clusters run version 10.5. The engineer checks under System > Centralized Deployment and notes that Status remains UnSynchronized. What are two reasons for this status? (Choose two.)

The Cisco UCM and IM and Presence cluster must be running at least version 11.5 to allow for Centralized Deployment.

The remote Cisco UCM cluster does not support OAuth Refresh Token flow.

This connection must be synchronized from the remote Cisco UCM Administration menu.

The username ana/or password of the application user that was provided for adding remote dusters to the central IM and Presence is incorrect.

The application user that is configured on remote Cisco UCM clusters does not have ‘Standard AXL API Access- added.

NO.62 incorrect options
Refer to the exhibit.

A collaboration engineer has integrated Cisco Unity Express with Cisco Unified Communications Manager Express and is experimenting with the MWI feature. With the current configuration, no MWI change occurs when leaving new messages or after playing new messages. Which two changes are needed to correct the configuration? (Choose two.)

ccn subsystem sip
mwi sip outcall

ccn subsystem sip
mwi envelop-info

sip-ua
no mwi-server
mwi-server ipv4:172.16.1.254 expires 3600 port 5060 transport udp

ccn subsystem sip
mwi sub-notify

sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport tcp notify

sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport udp unsolicited

NO.63 An administrator is setting up the Cisco Unified IM and Presence on-premises high availability feature and wants the Server Recovery Manager to initiate failover after 90 seconds. However, failover is happening after 60 seconds. How is this issue corrected?

Change peer Heartbeat Timeout to 90 seconds.

Change Keep Alive (Heartbeat) Interval to 90 seconds.

Change critical service delay to 90 seconds.

Change Keep Alive (Heartbeat) Timeout to 90 seconds.

NO.64 Which statement about SIP federation between Cisco Unified Communications IM and Presence and Microsoft Skype for Business is true?

Add the federated user as a contact in Jabber to view its presence status.

The role of SIP Proxy service is to process the XMPP packet in from Jabber and convert it to SIP.

TLS is optional.

Use of directory URI as an IM addressing scheme is not supported.

NO.65 Which type of SRV record provides the location of Cisco Expressway-E?

_collab-edge._tls.example.com

_cisco-uds._tcp.example.com

_cuplogin._tcp.example.com

_http._tcp.example.com

NO.66 Which function of the Cisco IM and Presence high availability solution is true?

When the server has been restored to a normal state, user sessions remain on the backup server.

When an event takes place, the end user sessions are not moved from the failed server to the backup.

When the server has been restored, the server automatically fails back.

When a high availability event takes place, the end user sessions are moved from the failed server to the backup.

NO.67 Refer to the exhibit.

Cisco Unity Connection and Cisco Unified Communications Manager are integrated by using SCCP. The Voice Mail Ports are registered. Users report that calls fail when forwarded to voicemail. Which is a cause of the issue?

The call forward and call pickup settings do not have a CSS on Forward All.

The Voice Mail Port partition on the CSS of the phone is missing.

The Voice Mail Pilot is not configured with a CSS that contains the INTERNAL_PT.

The CSS on the Voice Mail Pilot is missing partitions for user phones.

NO.68 Refer to the exhibit.

Which two steps resolve the “Users with Duplicate User IDs” message? (Choose two.)

Rename the directory URI value for one of the users to ensure that there is no duplication.

Rename the User ID value for one user if different users on different clusters have the same User ID assigned.

Unassign a user from one of the clusters when the same user is assigned to two different clusters.

Assign the duplicate user to the secondary Cisco IM and Presence node.

Delete the user ID for the duplicate user ID.

NO.69 Drag and drop the steps for SAML SSO authentication from the left into the order on the right.

NO.70 Refer to the exhibit.

Calls that are not answered by the user are for the location. If the user at extension 11112222 does not have a voice mailbox, which rule is utilized when Cisco Unity Communication receives the forwarded call?

NewYork_AA

Attempt Sign In

Arizona_AA

Opening_Greeting

NO.71 Users on Cisco.com experience issues while using Cisco Jabber, and the error ‘Cannot communicate with the server” appears. An engineer checks the logs for the Jabber client and discovers the error “LERR_JABBER_AUTH <17>: Authentication error with server e.g. resource bind, TLS, create a session or SASL error. What should be checked to resolve this issue?

if the LDAP server Is reachable and if port 443 Is open

if cup-xmpp certificates are valid and if port 8443 is open

if the cup-xmpp certificates are valid and if port 5222 is open

if the LDAP server Is reachable and If port 5222 Is open