Updated Dec-2023 E_S4HCON2023 Exam Practice Test Questions [Q17-Q40]

Rate this post

Updated Dec-2023 E_S4HCON2023 Exam Practice Test Questions

Verified E_S4HCON2023 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump

Q17. What SAP systems can you use for the ABAP Test Cockpit (ATC) to perform the custom code analysis for an SAP S/4HANA conversion? Note: There are 2 correct answers to this question.

Standalone AS ABAP with SAP_BASIS 752 and above

SAP ECC system from SAP ERP 6.0 EHP 8

SAP Solution Manager 7.2

SAP S/4HANA Server 1809 and above

Q18. Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:

Uninstall industry extensions not supported by SAP S/4HANA

Install add-on SAP Gateway 7.50

Uninstall Fiori apps not released for SAP_UI 7.50

Delete client 066 (Early Watch Client)

Q19. You are upgrading a three-system landscape DEV – QAS – PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system. What do you need to consider? Please choose the correct answer.

The upgrade of the PRD must be finished before you start new development in the DEV.

The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.

The transport between Unicode and non-Unicode systems is forbidden.

The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.

Q20. What is the minimum SAP_BASIS release of an SAP ECC system that can be converted to an SAP S/4HANA Server?

750

700

731

740

Q21. You are executing as SAP S/4HANA Conversion with scenario strategy Standard. When will the shadow instance be stopped for the last time?

As part of the cleanup process

Before the downtime starts

Early in the downtime

At the end

Q22. You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step
“Configuration”. For some software components you find entries in the “Calculated level” column.
What does the “Calculated level” indicate for those software components?
Please choose the correct answer.
Response:

The SAP Support Packages contained in the upgrade media

The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner

The SAP Support Packages that will be bound to the upgrade

The SAP Support Packages found in the download directory

Q23. You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.

Apply the corresponding SAP note via SAP Note Assistant

Generate it by analyzing the specific custom code via RFC

Configure it within transaction ATC

Download it from SAP Support Portal

Q24. Which are valid options to check the progress of the database migration in a Microsoft Windows environment?
There is correctanswers to this question.
Response:

Check the “Charts Control Center” in the SUM UI

Check logs for jobs starting with “RSUPG_SGEN” in the system

Check the log files written under “SUMabaplog”

Check the dump size of the database export on disk

Q25. During a SUM run you want to check if the phase SHADOW_IMPORT_INC is still running properly. Where can you find information about this?
There are 2 correct answers to this question.
Response:

Check for running batch jobs in the shadow system via Job Overview (SM37)

Check for running R3trans processes on the host of the primary application server

Check for running R31oad processes on the host of the primary application server

Check for the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp

Q26. How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
Response:

By searching for transport requests that are assigned to the project SAP_ADJUST

By searching for transport requests named <SID>K0<number>

By searching for transport requests in DIR_TRANS, subdirectory “transport”

By searching for transport requests in the file umodauto.Ist

Q27. You have chosen the “Advanced” option during the main configuration of the SUM tool. Which steps take place via the shadow instance?
There are 2 correct answers to this question.
Response:

Conversion of application tables (PARCONVJJPG)

Activation of dictionary objects (ACT_UPG)

Switch to new repository (EU_SWITCH)

Modification adjustment (SPDD)

Q28. When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:

Parameter file SAPup_add.par

Stack XML file calculated by the Maintenance Planner

Breakpoint configuration file SAPUPPHAS.BRK

MIGRATE J5T_DUR_XML file from a previous run

Q29. You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step “Extraction”.
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:

In SUM Phaselist

In Process Control Center

In SUM Parameters

In DMO Migration Preparation

Q30. What do you need to know about the SAP S/4HANA Conversion Guide? Note: There are 2 correct answers to this question.

It explains the database migration option (DMO) of SUM.

It contains a section about the simplification item (SI) checks.

It explains where to find information about the custom code analysis.

It is a database-specific document.

Q31. You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.

Credentials of a named user in client 000 of the shadow system

Credentials of a named user in the development client of the development system

Credentials of user DDIC in client 000 of the shadow system

Credentials of user DDIC in the development client of the development system

Q32. You want to execute a Unicode Conversion only. Which approach do you need to follow?
Please choose the correct answer.
Response:

SWPM using the Backup / Restore procedure

SUM with DMO

SUM without DMO

SWPM using the Load procedure

Q33. What can you achieve by setting the SUM parameter “migration_only” to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:

An upgrade of the software components is performed, without changing the database type.

A change of the database type is performed, without changing the software components.

An SAP S/4HANA conversion is performed, without adapting the customer data.

A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.

Q34. You are performing an SAP S/4HANA conversion. When does the silent data migration (SDM) take place?

After SUM has ended

During the Execution roadmap step

Before the start of the SUM technical downtime

During the SUM technical downtime

Q35. Which of the following are valid options to check the progress of an inplace SUM DMO run? Note There are 2 correct answers to this question

Check the dump size of the database export on disk.

Check the Charts Control Center in the SUM Ul

Check logs for jobs starting with RSUPG_SGEN in the SAP system.

Check the log files written in the SUM directory subdirectory abap. subdirectory log

Q36. Unicode migration ECC on MaxDB to HANA in scale out what should we consider.

Target DB size will increase temporarily

DMO can only be run with systems NW740 or NW731

Q37. During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status “automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?

SUM continues with the next phase and your modifications are kept as In the start release

SUM continues with the next phase and your modifications are lost

Before continuing with the next phase SUM asks for a modification adjustment transport

SUM refuses to continue unless you have marked a transport request as modification adjustment transport

Q38. During the configuration of the DMO for SUM, how does the tool behave if option “Do not compare table contents” is selected regarding table comparison?
Please choose the correct answer.
Response:

It performs a comparison on selected tables using check sum.

It performs a comparison on all tables using row counts.

It performs a comparison of all tables using check sum.

It does NOT perform any table comparison.

Q39. Which steps can SUM perform during an SAP S/4HANA conversion? Note; There are 2 correct answers to this question.

Unicode conversion

Custom code analysis

Database migration

Software update

Q40. What do you need to consider when performing the SI checks for an SAP S’4I 1ANA conversion? Note There are 2 correct answers to this question.

You need an SAP system based on AS ABAP 7.50 or above for the SI check framework

The SI checks are executed in the development system and the results are transported into the subsequent systems

The errors from the SI checks must be solved, otherwise. SUM will report an error

You need to build up an SI check framework by applying SAP Notes