Excellent 200-301 Updated 2026 Dumps With 100% Exam Passing Guarantee [Q482-Q503]

Rate this post

Excellent 200-301 Updated 2026 Dumps With 100% Exam Passing Guarantee

Best way to practice test for Cisco 200-301

Cisco 200-301 certification exam is designed for network administrators, network engineers, network technicians, and other IT professionals who are looking to enhance their networking skills and advance their careers. 200-301 exam is also suitable for individuals who are new to the networking field and want to gain a solid foundation in networking concepts and technologies. Cisco Certified Network Associate Exam certification exam is a prerequisite for many Cisco professional-level certifications, including the Cisco Certified Network Professional (CCNP) and Cisco Certified Internetwork Expert (CCIE).

Q482. Aswitch receives a frame with the destination MAC address 3C:5D: 7E:9F: 1A:2B.
Switch# show ethernet-frame-and-mac-address-table

How does the switch handle the frame?

It ages out the frame until the MAC address becomes known.

It drops the frame to avoid unnecessary network congestion.

It switches the frame to a predetermined port based on settings.

It floods the frame to all ports except the incoming port.

Q483. Which function is performed by DHCP snooping?

propagates VLAN information between switches

listens to multicast traffic for packet forwarding

provides DDoS mitigation

rate-limits certain traffic

DHCP snooping is a security feature that acts like a firewall between untrusted hosts and trusted DHCP servers. The DHCP snooping feature performs the following activities: Validates DHCP messages received from untrusted sources and filters out invalid messages.

Q484. How do traditional campus device management and Cisco DNA Center device management differ in regards to deployment?

Traditional campus device management allows a network to scale more quickly than with Cisco DNA Center device management.

Cisco DNA Center device management can deploy a network more quickly than traditional campus device management.

Cisco DNA Center device management can be implemented at a lower cost than most traditional campus device management options.

Traditional campus device management schemes can typically deploy patches and updates more quickly than Cisco DNA Center device management.

Section: Automation and Programmability

Q485. What is a function of a Next-Generation IPS?

makes forwarding decisions based on learned MAC addresses

serves as a controller within a controller-based network

integrates with a RADIUS server to enforce Layer 2 device authentication rules

correlates user activity with network events

Q486. What are two reasons that duplex mismatches can be difficult to diagnose? (Choose two.)

The interface displays a connected (up/up) state even when the duplex settings are mismatched.

1-Gbps interfaces are full-duplex by default.

Full-duplex interfaces use CSMA/CD logic, so mismatches may be disguised by collisions.

The symptoms of a duplex mismatch may be intermittent.

Autonegotiation is disabled.

Q487. Refer to the exhibit.

What action establishes the OSPF neighbor relationship without forming an adjacency?

modify hello interval

modify process ID

modify priority

modify network type

Q488. Refer to the exhibit.

Drag and drop the networking parameters from the left onto the correct values on the right.

Explanation:

NIC vendor OUI -> 00:0C:22
NIC MAC address -> 00:0C:22:83:79:A3
default gateway -> 192.168.1.193
host IP address -> 192.168.1.200
subnet mask -> 255.255.255.192
The “ip route” and “ip addr show eth1” are Linux commands.
+ “ip route”: display the routing table
+ “ip addr show eth1”: get depth information (only on eth1 interface) about your network interfaces like IP Address, MAC Address information

Q489. Drag the IPv6 DNS record types from the left onto the description on the right.

https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20(A%20Record,a%20hostname%20to%20another%20hostname.

Q490. Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.

Explanation

The focus of Ansible is to be streamlined and fast, and to require no node agent installation.
Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef.
TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file .
This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.
Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative-paradigm programming approach.
A Puppet piece of code is called a manifest, and is a file with .pp extension.

Q491.

Refer to the exhibit. Configurations for the switch and PCs are complete.
Which configuration must be applied so that VLANs 2 and 3 communicate back and forth?

interface GigabitEthernet0/0
ip address 10.10.2.10 255.255.252.0

interface GigabitEthernet0/0.3
encapsulation dot1Q 3 native
ip address 10.10.2.10 255.255.252.0

interface GigabitEthernet0/0.10
encapsulation dot1Q 3

interface GigabitEthernet0/0.3
encapsulation dot1Q 10
ip address 10.10.2.10 255.255.252.0

Q492. Refer to exhibit.

Which statement explains the configuration error message that is received?

It is a broadcast IP address

The router does not support /28 mask.

It belongs to a private IP address range.

IT is a network IP address.

Q493. Drag and drop the characteristic from the left onto the IPv6 address type on the right.

Explanation:

Q494. Refer to the exhibit.

What is a reason for poor performance on the network interface?

The interface is receiving excessive broadcast traffic.

The cable connection between the two devices is faulty.

The interface is operating at a different speed than the connected device.

The bandwidth setting of the interface is misconfigured

The interface is receiving excessive broadcast traffic.. The answer follows directly from normal Cisco device behavior and the wording of the scenario. Cisco CCNA 200-301 v1.1 includes this under Network Access, where the exam expects engineers to recognize the device behavior that actually produces the required outcome. The question is best solved by reading the operational clue rather than choosing a familiar acronym.
The other choices are either adjacent technologies, wrong-layer functions, or settings that would not produce the stated result. In a production network, the wrong choice would normally create an outage, leave a management or security gap, or send troubleshooting toward the wrong subsystem. The selected answer is the one that matches the control-plane, data-plane, wireless, security, services, or automation mechanism described in the question. That is why it remains the verified answer for this item.

Q495. Refer to the exhibit.

Which two commands must be configured on router R1 to enable the router to accept secure remote-access connections? (Choose two)

transport input telnet

crypto key generate rsa

ip ssh pubkey-chain

username cisco password 0 Cisco

Q496. Refer to the exhibit.

What does router R1 use as its OSPF router-ID?

10.10.1.10

10.10.10.20

172.16.15.10

192.168.0.1

Q497. Drag and drop the statement about networking from the left into the Corresponding networking types on the right. Not all statements are used.

Explanation:
2, 4
1, 3

Q498. Which HTTP status code is returned after a successful REST API request?

200

301

404

500

Q499. Refer to the exhibit. Which path is used by the router for internet traffic?

209.165.200.0/27

10.10.10.0/28

0.0.0.0/0

10.10.13.0/24

For internet traffic… the destination IP’s can vary. Hence in this topology, it is using the default gateway 0.0.0.0. Path selection does not meet any other criteria so it has to use gateway of last resort.

Q500. Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.

Explanation

Q501. Drag and drop the AAA features from the left onto the corresponding AAA security services on the right. Not all options are used.

Q502. Drag and drop the steps in a standard DNS lookup operation from the left into the order on the right.

Explanation:

Q503. Drag and drop the IPv6 address types from the left onto their description on the right.

Explanation:

Loading …

Cisco 200-301 certification exam covers a variety of topics related to networking. Some of the topics covered in the exam include network fundamentals, network access, IP connectivity, IP services, security fundamentals, automation, and programmability. 200-301 exam also covers wireless networking concepts, which are becoming increasingly important in today’s connected world. 200-301 exam tests the candidate’s ability to configure, troubleshoot, and manage Cisco networks.

Cisco Certified Network Associate Exam Certification Sample Questions and Practice Exam: https://www.passtestking.com/Cisco/200-301-practice-exam-dumps.html

Categories:200-301Cisco