[2024年1月14日】Download Free Microsoft AZ-801 Real Exam Questions [Q43-Q63].

Q43. 注：この問題は、同じシナリオを提示する一連の問題の一部です。このシリーズの各問題には、指定された目標を満たす可能性のあるユニークな解答が含まれています。問題によっては複数の正解がある場合もありますが、正解がない場合もあります。
このセクションの質問に答えた後は、その質問に戻ることはできません。その結果、これらの質問はレビュー画面には表示されません。
You have a failover cluster named Cluster1 that hosts an application named App1.
The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.)

The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.)

Server1 shuts down unexpectedly.
You need to ensure that when you start Server1, App1 continues to run on Server2.
Solution: You increase Maximum failures in the specified period for the App1 cluster role.
これは目標を達成しているのか？

Q44. You have a server named Server1 that runs Windows Server.
You need to ensure that only specific applications can modify the data in protected folders on Server1.
Solution: From App & browser control, you configure the Reputation-based protection.
これは目標を達成しているのか？

Q45. You have 200 Azure virtual machines.
You create a recovery plan in Azure Site Recovery to fail over all the virtual machines to an Azure region. The plan has three manual actions.
You need to replace one of the manual actions with an automated process.
何を使うべきか？

Q46. You are planning the data share migration to support the on-premises migration plan.
What should you use to perform the migration?

Q47. You are remediating the firewall security risks to meet the security requirements.
What should you configure to reduce the risks?

Q48. You have three servers named Server 1. Servers and Server3 that run Windows Server. The servers have the Hyper-V server rote installed and are configured in a Storage Spaces Deed cluster named Cluster1.
Cluster1 hosts a virtual machine named VM1 that has Windows Admin Center Installed.
You manage all servers and clusters by using Windows Admin Center.
You purchase an Azure subscription.
You need to configure email alerts in Azure Monitor for the following:
* Disk Capacity Utilization Over 80% for 10 Minutes
* Any critical alert in the cluster system event log
* Memory Utilization over 95% for 10 minutes
* Heartbeat fewer than 5 beats for 5 Minutes.
* CPU Utilization over 85 % for 10 Minutes.
* Any hearth service faults for the cluster
The solution must use the minimum amount of administrative effort.
どうするべきか？

Q49. You have a server named Server1 that runs Windows Server.
On Server1, you create a Data Collector Set named CollectorSet1 based on the Basic template.
You need to configure CollectorSet1 to meet the following requirements:
* Older performance counter logs must be overwritten by new ones.
* Performance counter logging must stop if there is less than 500 MB of free disk space.
各要件に対して何を構成する必要がありますか？回答するには、回答エリアで適切なオプションを選択してください。
注意：各選択肢の正誤は1点満点とする。

Q50. You have a server that runs Windows Server and has the Web Server (IIS) server role installed. Server1 hosts a single website that has the following configurations:
* Is accessible by using a URL of https://www.contoso.com:8443 and has an SSL certificate that was issued by a third-party certification authority (CA) in the Microsoft Trusted Root Program
* Uses anonymous authentication
* Was developed by using PHP
You plan to use APP Service Migration Assistant to migrate the website to Azure App Service.
You need to migrate the website. The solution must minimize the number of changes made to the existing website.
What should you do manually to ensure that the website migration is successful? To answer, select the appropriate options in the answer area.
注意：各選択肢の正誤は1点満点とする。

Q51. You have an on-premises Active Directory Domain Services (AD DS) domain that syncs with an Azure Active Directory (Azure AD) tenant.
The AD DS domain contains a domain controller named DC1. DC1 does NOT have internet access.
You need to configure password security for on-premises users. The solution must meet the following requirements:
Prevent the users from using known weak passwords.
Prevent the users from using the company name in passwords.
What should you do? To answer, drag the appropriate configurations to the correct targets. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
注意：各選択肢の正誤は1点満点とする。

Q52. You are planning the implementation of Cluster2 to support the on-premises migration plan.
You need to ensure that the disks on Cluster2 meet the security requirements.
どの順番でアクションを行うべきか？回答するには、すべてのアクションをアクションリストから回答エリアに移動し、正しい順番に並べます。

Q53. The Default Domain Policy Group Policy Object (GPO) is shown in the GPO exhibit. (Click the GPO tab.)

The members of a group named Service Accounts are shown in the Group exhibit. (Click the Group tab.)

An organizational unit (OU) named ServiceAccounts is shown in the OU exhibit. (Click the OU tab.)

You create a Password Settings Object (PSO) as shown in the PSO exhibit. (Click the PSO tab.)

以下の各記述について、その記述が真であれば「はい」を選択する。そうでない場合は、「いいえ」を選択してください。
注意：各選択肢の正誤は1点満点とする。

Q54. You are planning the DHCP1 migration to support the DHCP migration plan.
Which two PowerShell cmdlets should you run on DHCP1, and which two PowerShell cmdlets should you run on DHCP2? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
注意：各選択肢の正誤は1点満点とする。

Q55. You have a server named Server1 that runs Windows Server and has the Web Server (IIS) server role installed.
Server1 hosts an ASP.NET Core web app named WebApp1 and the app’s source files.
Server1にDockerをインストールする。
Azure Container Registry から WebApp1 を Azure App Service Web アプリにデプロイできることを確認する必要があります。
順番に実行すべき3つのアクションはどれでしょう？答えるには、アクションのリストから適切なアクションを解答エリアに移動し、正しい順番に並べます。

Q56. You have a Hyper-V failover cluster named Cluster1 at a main datacenter. Cluster1 contains two nodes that have the Hyper-V server role installed. Cluster1 hosts 10 highly available virtual machines.
You have a cluster named Cluster2 in a disaster recovery site. Cluster2 contains two nodes that have the Hyper-V server role installed.
You plan to use Hyper-V Replica to replicate the virtual machines from Cluster1 to Cluster2.
あなたは何をすべきですか？回答するには、回答エリアで適切な選択肢を選択してください。
注意：各選択肢の正誤は1点満点とする。

Q57. Windows Serverが動作するServer1という名前のサーバーがあり、Web Server（IIS）サーバーの役割がインストールされています。Server1 は、WebApp1 という名前の ASP.NET Core Web アプリとアプリのソース ファイルをホストしています。
Server1にDockerをインストールする。
Azure Container Registry から WebApp1 を Azure App Service Web アプリにデプロイできることを確認する必要があります。
順番に実行すべき3つのアクションはどれでしょう？答えるには、アクションのリストから適切なアクションを解答エリアに移動し、正しい順番に並べます。

Q58. You have the servers shown in the following table.

You plan to migrate file shares from Server1 to Server2.

Q59. What is the effective minimum password length for User1 and Admin1? To answer, select the appropriate options in the answer area.
注意：各選択肢の正誤は1点満点とする。

Q60. You need to use a comma-separated value (CSV) file to import server inventory to Azure Migrate. Which fields are mandatory for each entry in the CSV file?

Q61. You have a failover cluster named Cluster1 that has the following configurations:
Number of nodes: 6
Quorum: Dynamic quorum
Witness: File share, Dynamic witness
What is the maximum number of nodes that can fail simultaneously while maintaining quorum?

Q62. You have a server that runs Windows Server and has the Web Server (IIS) server role installed. Server1 hosts a single website that has the following configurations:
Is accessible by using a URL of https://www.contoso.com:8443 and has an SSL certificate that was issued by a third-party certification authority (CA) in the Microsoft Trusted Root Program Uses anonymous authentication Was developed by using PHP You plan to use APP Service Migration Assistant to migrate the website to Azure App Service.
You need to migrate the website. The solution must minimize the number of changes made to the existing website.
What should you do manually to ensure that the website migration is successful? To answer, select the appropriate options in the answer area.
注意：各選択肢の正誤は1点満点とする。

Q63. Your network contains an Active Directory Domain Services (AD DS) forest. The forest functional level is Windows Server 2012 R2. The forest contains the domains shown in the following table.

You create a user named Admin1.
You need to ensure that Admin1 can add a new domain controller that runs Windows Server 2022 to the east.contoso.com domain. The solution must follow the principle of least privilege.
To which groups should you add Admin1?