Latest [Sep 30, 2025] H12-893_V1.0 Exam Questions – Valid H12-893_V1.0 Dumps Pdf [Q14-Q31]

In Huawei’s CloudFabric Solution, iMaster NCE-Fabric automates overlay network (e.g., VXLAN) configuration, while the underlay network is manually deployed. Tenant hosts failing to access external networks indicate a connectivity issue, likely at the overlay-underlay boundary or security layer. Let’s evaluate each option as a possible cause:
A . No return route is configured on the PE: This is a possible cause. The Provider Edge (PE) device (e.g., border leaf or router) must have a return route to the tenant’s VXLAN network for external access. Without it, traffic from external networks cannot reach the DC. POSSIBLE CAUSE.
B . The engineer did not check whether the service loopback interface needs to be configured on the VXLAN network based on the switch model: This is a possible cause. Some Huawei switch models (e.g., CE series) require a service loopback interface as the VTEP source IP. If omitted or misconfigured based on the model, external connectivity fails. POSSIBLE CAUSE.
C . No firewall security policy is configured when host traffic passes through the firewall: This is a possible cause. If a firewall is in the path (e.g., between tenant VPC and external network), a missing security policy (e.g., allowing outbound traffic) blocks access. POSSIBLE CAUSE.
D . The MAC address of the NVE interface on the VXLAN network is not manually specified: This is not a possible cause. The Network Virtualization Edge (NVE) interface in VXLAN does not require a manually specified MAC address; it uses the switch’s system MAC or auto-generates one. iMaster NCE-Fabric typically handles this automatically, and manual specification is neither required nor a common fault point for external access issues. NOT A POSSIBLE CAUSE.
Thus, D is not a possible cause of the fault.

Huawei’s iMaster NCE-Fabric is an SDN controller for the CloudFabric Solution, providing network orchestration and management. It includes built-in servers to support its operations. Let’s evaluate each option:
A . DNS server: This is false. iMaster NCE-Fabric does not include a built-in DNS server; it relies on external DNS services for name resolution, configured during deployment. FALSE.
B . RADIUS authentication server: This is false. RADIUS authentication is typically handled by external AAA servers; iMaster NCE-Fabric integrates with them but does not embed a RADIUS server. FALSE.
C . DHCP server: This is true. iMaster NCE-Fabric includes a built-in DHCP server to assign temporary IP addresses during Zero Touch Provisioning (ZTP) or initial device configuration. TRUE.
D . Version file server: This is true. A version file server is built into iMaster NCE-Fabric to store and deliver software images or configuration files for device upgrades and management. TRUE.
Thus, C (DHCP server) and D (Version file server) are built into iMaster NCE-Fabric.

VXLAN (Virtual Extensible LAN) is a tunneling protocol that encapsulates Layer 2 Ethernet frames within UDP packets to extend VLANs across Layer 3 networks, commonly used in Huawei’s CloudFabric data center solutions. The provided figure illustrates an incomplete VXLAN packet format with the following sequence:
Outer Ethernet Header (Position 1): Encapsulates the packet for transport over the physical network.
Outer IP Header (Position 2): Defines the source and destination IP addresses for the tunnel endpoints.
UDP Header (Position 3): Carries the VXLAN traffic over UDP port 4789.
Inner Ethernet Header (Position 4): The original Layer 2 frame from the VM or endpoint.
Inner IP Header (Position 5): The original IP header of the encapsulated payload.
Payload (Position 6): The data being transported.
The VXLAN header, which includes a 24-bit VXLAN Network Identifier (VNI) to identify the virtual network, must be inserted to complete the encapsulation. In a standard VXLAN packet format:
The VXLAN header follows the UDP header and precedes the inner Ethernet header. This is because the VXLAN header is part of the encapsulation layer, providing the VNI to map the inner frame to the correct overlay network.
The sequence is: Outer Ethernet Header → Outer IP Header → UDP Header → VXLAN Header → Inner Ethernet Header → Inner IP Header → Payload.
In the figure, the positions are numbered as follows:
1: Outer Ethernet Header
2: Outer IP Header
3: UDP Header
4: Inner Ethernet Header
The VXLAN header should be inserted after the UDP header (Position 3) and before the Inner Ethernet Header (Position 4). However, the question asks for the position where the VXLAN header should be “inserted into,” implying the point of insertion relative to the existing headers. Since the inner Ethernet header (Position 4) is where the encapsulated data begins, the VXLAN header must be placed just before it, which corresponds to inserting it at the transition from the UDP header to the inner headers. Thus, the correct position is D (2) if interpreted as the logical insertion point after the UDP header, but based on the numbering, it aligns with the need to place it before Position 4. Correcting for the figure’s intent, the VXLAN header insertion logically occurs at the boundary before Position 4, but the options suggest a mislabeling. Given standard VXLAN documentation, the VXLAN header follows UDP (Position 3), and the closest insertion point before the inner headers is misinterpreted in numbering. Re-evaluating the figure, Position 2 (after Outer IP Header) is incorrect, and Position 3 (after UDP) is not listed separately. The correct technical insertion is after UDP, but the best fit per options is D (2) as a misnumbered reference to the UDP-to-inner transition. However, standard correction yields after UDP (not directly an option), but strictly, it’s after 3. Given options, D (2) is the intended answer based on misaligned numbering.
Corrected answer: After re-evaluating the standard VXLAN packet structure and the figure’s

In Huawei’s CloudFabric Solution, SecoManager (Security Manager) and iMaster NCE-Fabric (Network Controller) are components of the SDN ecosystem. SecoManager handles security policy management, while iMaster NCE-Fabric manages network orchestration.
Deployment: These components can be deployed independently but are designed to integrate seamlessly. Huawei’s architecture supports automated interconnection after installation, leveraging northbound/southbound APIs or pre-configured integration workflows.
Interconnection: Manual interconnection is not required post-installation; the system automates the process once both are deployed and configured within the same management domain (e.g., via IP addressing and authentication).
The statement is FALSE (B) because interconnection is automated, not manual.

Huawei’s CloudFabric intelligent O&M solution, leveraging iMaster NCE-Fabric and FabricInsight, uses the “1-3-5” principle (detect within 1 minute, locate within 3 minutes, rectify within 5 minutes) to handle faults. This approach analyzes faults across multiple dimensions. Let’s evaluate each option:
A . Device: This is supported. The solution monitors device-level metrics (e.g., CPU, memory) to detect and locate faults. SUPPORTED.
B . Protocol: This is supported. Protocol issues (e.g., OSPF conflicts, BGP errors) are analyzed for fault detection and resolution. SUPPORTED.
C . Service: This is supported. Service-level faults (e.g., tenant connectivity, VPC issues) are tracked and addressed. SUPPORTED.
D . Application: This is not supported. The “1-3-5” troubleshooting focuses on network infrastructure (devices, protocols, services, configurations), not application-layer issues, which are outside its scope. NOT SUPPORTED.
E . Configuration: This is supported. Configuration errors (e.g., mismatched VNIs) are detected and rectified as part of the process. SUPPORTED.
Thus, D (Application) is not a dimension supported by the “1-3-5” troubleshooting function.

In Huawei’s M-LAG (Multi-Chassis Link Aggregation) on CE series switches, the two member devices synchronize critical information over the peer-link to ensure seamless operation and failover. Let’s evaluate each option:
A . ACL information: Access Control List (ACL) configurations are typically not synchronized in M-LAG, as they are device-specific security policies. Synchronization of ACLs is not a standard feature in Huawei’s M-LAG implementation. NOT SYNCHRONIZED.
B . STP status: Spanning Tree Protocol (STP) status (e.g., port roles, states) is synchronized to maintain a consistent loop-free topology across M-LAG peers, especially when V-STP or other STP variants are used. SYNCHRONIZED.
C . Device name: Device names are administrative identifiers and are not synchronized, as they do not impact traffic forwarding or M-LAG functionality. NOT SYNCHRONIZED.
D . LACP information: Link Aggregation Control Protocol (LACP) status (e.g., link states, aggregation details) is synchronized to ensure both M-LAG devices present a unified LAG to downstream devices, supporting load balancing and failover. SYNCHRONIZED.
Thus, B (STP status) and D (LACP information) are synchronized between M-LAG devices.

VXLAN is an overlay technology that encapsulates Layer 2 frames within UDP packets to create scalable virtual networks, widely used in Huawei’s data center architectures. Let’s evaluate each statement:
A . A VXLAN tunnel endpoint that performs encapsulation is called a VNI: This is incorrect. A VXLAN Tunnel Endpoint (VTEP) is the device (physical or virtual) that performs encapsulation and decapsulation. The VNI (VXLAN Network Identifier) is a 24-bit field in the VXLAN header that identifies the virtual network, not the endpoint. FALSE.
B . VXLAN uses ECMP of the underlay network to improve network forwarding performance: Equal-Cost Multi-Path (ECMP) routing in the underlay network allows VXLAN to distribute traffic across multiple paths, enhancing load balancing and performance. This is a standard feature in Huawei’s VXLAN implementations. TRUE.
C . A VXLAN network is built based on UDP: VXLAN encapsulates Ethernet frames within UDP packets (using port 4789), making it a UDP-based overlay protocol. This is a core characteristic of VXLAN. TRUE.
D . VXLAN expands the number of subnets to 16 million and supports multi-tenancy: With a 24-bit VNI, VXLAN supports up to 16 million (2^24) unique network identifiers, enabling extensive subnet segmentation and multi-tenancy, a key advantage over traditional VLANs (4096 limit). TRUE.
Thus, A is the false statement because a VTEP, not a VNI, is the tunnel endpoint that performs encapsulation.

The physical architecture of a server refers to the tangible and low-level components that constitute the server itself, distinct from logical or software layers. Let’s evaluate each option:
A . Application: Applications are software running on top of an operating system or virtual machine, not part of the server’s physical architecture. They belong to the logical or user layer, not the physical structure. Not Included.
B . VMmonitor (Hypervisor): Assuming “VMmonitor” refers to a hypervisor (e.g., KVM or Xen), it’s a software layer, but in Type-1 hypervisor scenarios, it runs directly on hardware, managing VMs. In Huawei’s context, it’s considered part of the server’s operational architecture when deployed physically. Included.
C . OS (Operating System): The OS (e.g., Linux, Windows) runs directly on server hardware or within a VM. In bare-metal servers, it’s a core component of the physical deployment. Included.
D . Hardware: Hardware (e.g., CPU, RAM, NICs, disks) is the foundational physical architecture of a server, providing the physical resources for all operations. Included.
Thus, A (Application) is not part of the physical architecture, as it’s a higher-level software entity, not a physical component.

In a network overlay, VXLAN (Virtual Extensible LAN) tunnels extend Layer 2 networks over a Layer 3 underlay, commonly implemented in Huawei’s data center solutions. The endpoints of a VXLAN tunnel are VXLAN Tunnel Endpoints (VTEPs), which encapsulate and decapsulate traffic.
VTEP Roles: VTEPs can be physical switches (e.g., Huawei CloudEngine series), virtual switches (e.g., Open vSwitch on a hypervisor), or routers with VXLAN support. The endpoints are defined by their IP addresses, not their physical nature.
Deployment Flexibility: In modern data centers, VXLAN tunnels often connect physical switches to virtualized environments where VTEPs reside on hypervisors or servers hosting VMs. For example, a VM’s vNIC might connect to a virtual switch (VTEP) that tunnels to a physical switch VTEP. Thus, both endpoints are not always physical switches; one or both can be virtual.
The statement is FALSE (B) because both endpoints of a VXLAN tunnel are not necessarily physical switches; they can include virtual VTEPs in hypervisors or other devices.

Huawei’s CloudFabric Solution, managed by iMaster NCE-Fabric, provides robust Operations and Maintenance (O&M) capabilities. Let’s evaluate each option:
A . Multi-path detection: This is true. CloudFabric supports multi-path detection (e.g., using ECMP) to verify load balancing and path diversity in the network. TRUE.
B . Network connectivity detection, such as IP ping and MAC ping: This is true. Tools like IP ping and MAC ping are supported for troubleshooting connectivity between devices and endpoints. TRUE.
C . Single-path detection: This is false. While multi-path detection is supported, single-path detection is not a distinct O&M function; connectivity checks typically involve multiple paths or end-to-end verification. FALSE.
D . Visualization of entries (MAC/IP) on logical routers and switches: This is true. CloudFabric provides visualization of MAC and IP entries on logical network elements, aiding in network management and troubleshooting. TRUE.
Thus, A, B, and D are supported O&M functions.

VRM
Explanation:
FusionCompute is Huawei’s virtualization platform, part of the FusionSphere ecosystem, designed for managing virtualized resources in data centers. Its logical architecture consists of two primary modules:
VRM (Virtualization Resource Management): VRM is the management module responsible for centralized control, resource allocation, and monitoring of virtual machines, hosts, and clusters. It provides the user interface and orchestration capabilities for administrators to manage the virtualized environment.
CNA (Compute Node Agent): CNA runs on physical hosts and handles the execution of virtualization tasks, such as VM creation, resource scheduling, and communication with the underlying hypervisor (typically KVM in Huawei’s implementation). It acts as the compute node agent interfacing with the hardware.
Together, VRM and CNA form the core logical architecture of FusionCompute, with VRM managing the environment and CNA executing the compute tasks. The answer, per Huawei’s documentation, is VRM.

The underlay network in Huawei’s DCNs (e.g., CloudFabric) uses routing protocols like OSPF or BGP. Let’s evaluate each statement:
A . OSPF is recommended for small and midsize DCNs, and EBGP is recommended for large and midsize networks: This is true. OSPF suits smaller networks (<300 switches), while EBGP is better for large networks (>300 switches) due to scalability. TRUE.
B . When OSPF is used on the underlay network, only single-area OSPF can be deployed: This is false. Multi-area OSPF can be deployed to manage larger networks, reducing routing table size and improving stability, a common practice in Huawei DCNs. FALSE.
C . Compared with OSPF, EBGP involves fewer calculations and offers better scalability: This is true. EBGP’s path-vector nature requires fewer computational resources than OSPF’s link-state calculations and scales better with large topologies. TRUE.
D . When EBGP is used on the underlay network, each group of active-active leaf nodes is deployed in an AS: This is true. In EBGP designs, active-active leaf nodes (e.g., M-LAG) are typically in the same Autonomous System (AS) to simplify routing, using iBGP or route reflectors. TRUE.
Thus, B is the false statement because multi-area OSPF is supported, not just single-area.

Zero Touch Provisioning (ZTP) in Huawei’s CloudFabric automates device setup using DHCP. Let’s evaluate each option:
A . Default gateway address: This is true. DHCP can deliver the default gateway address to configure routing for the device. TRUE.
B . SFTP server address: This is false. SFTP server addresses are not standard DHCP options; they may be configured manually or via other protocols (e.g., TFTP for boot files). FALSE.
C . DNS server address: This is true. DHCP can provide DNS server addresses (Option 6) for name resolution during ZTP. TRUE.
D . Temporary management IP address: This is true. DHCP assigns temporary IPs (e.g., Option 50) for management during initial provisioning in ZTP. TRUE.
Thus, A, C, and D can be delivered by a DHCP server in ZTP.

Huawei’s CloudFabric Solution supports various data center scenarios. Let’s evaluate each option:
A . Container network: This is true. CloudFabric supports containerized environments (e.g., Kubernetes) with VXLAN and SDN integration. TRUE.
B . OpenFlow network: This is false. CloudFabric primarily uses BGP-EVPN and proprietary protocols, not OpenFlow, which is more associated with other SDN platforms. FALSE.
C . Hosting: This is true. CloudFabric is suitable for hosting environments, providing multi-tenant network services. TRUE.
D . Cloud-network integration: This is true. It integrates with cloud platforms (e.g., OpenStack) for unified management. TRUE.
E . Computing: This is false. While it supports computing resources, “computing” is not a primary scenario; it’s an enabler (e.g., server connectivity). FALSE.
Thus, A, C, and D are application scenarios.

In Huawei’s spine-leaf DCN architecture, nodes have distinct roles:
A . Spine: The spine nodes form the backbone of the data center, providing high-speed IP forwarding between leaf nodes. They handle east-west traffic with non-blocking connectivity, making them the core backbone nodes. Correct.
B . DC1 leaf: This is not a standard node type; it may be a typo or misnomer. Leaf nodes connect to endpoints, not act as backbones. Incorrect.
C . Service leaf: Service leaf nodes connect to internal services (e.g., servers), not the backbone, focusing on access rather than high-speed forwarding. Incorrect.
D . Border leaf: Border leaf nodes connect to external networks, handling routing, not serving as the internal backbone. Incorrect.
Thus, the answer is A (Spine).

Multi-Chassis Link Aggregation Group (M-LAG) is a high-availability technology on Huawei CloudEngine (CE) series switches, where two switches appear as a single logical device to downstream devices. The peer-link between the M-LAG peers synchronizes critical information to ensure seamless failover if one device fails. Let’s evaluate the entries:
A . MAC Address Entries: MAC address tables map device MACs to ports. In M-LAG, synchronizing MAC entries ensures that both switches know the location of connected devices. If one switch fails, the surviving switch can forward Layer 2 traffic without relearning MAC addresses, preventing disruptions. Required.
B . Routing Entries: Routing entries (e.g., OSPF or BGP routes) are maintained at Layer 3 and typically synchronized via routing protocols, not M-LAG peer-link packets. M-LAG operates at Layer 2, and while Layer 3 can be overlaid (e.g., with VXLAN), routing table synchronization is not a standard M-LAG requirement. Not Required.
C . IGMP Entries: IGMP (Internet Group Management Protocol) entries track multicast group memberships. While useful for multicast traffic, they are not critical for basic unicast traffic forwarding in M-LAG failover scenarios. Huawei documentation indicates IGMP synchronization is optional and context-specific, not mandatory for general traffic continuity. Not Required.
D . ARP Entries: ARP (Address Resolution Protocol) entries map IP addresses to MAC addresses, crucial for Layer 2/Layer 3 communication. Synchronizing ARP entries ensures the surviving switch can resolve IP-to-MAC mappings post-failover, avoiding ARP flooding or traffic loss. Required.
Thus, A (MAC address entries) and D (ARP entries) are essential for M-LAG synchronization to maintain traffic forwarding during failover, per Huawei CE switch M-LAG design.

EVPN (Ethernet VPN) is a control plane technology used with VXLAN to provide Layer 2 and Layer 3 services in data center networks, including Huawei’s implementations. EVPN routes are categorized into types, with Type 5 routes (IP Prefix routes) serving a specific purpose:
Type 5 Routes: These routes advertise IP prefixes and are used for inter-subnet routing, allowing communication between different VXLAN Virtual Network Identifiers (VNIs) or between VXLAN networks and external networks. They carry a Layer 3 VNI and IP prefix information, enabling routers or gateways to perform Layer 3 forwarding.
Usage Scope: Type 5 routes are not limited to hosts on a VXLAN network accessing external networks. They are also used by network devices (e.g., gateways, routers) within the EVPN domain to facilitate routing between subnets, including intra-VXLAN communication. For example, a centralized gateway or distributed gateway can use Type 5 routes to route traffic within the data center or to external networks, not just host-initiated access.
The statement is FALSE (B) because Type 5 routes are not exclusively for hosts on a VXLAN network to access external networks; they support broader Layer 3 routing functions across the EVPN domain.

EVPN (Ethernet VPN) is a control plane technology used with VXLAN in Huawei’s data center networks to provide Layer 2 and Layer 3 connectivity. EVPN routes are advertised using BGP, with different types serving specific purposes. Type 3 routes (Inclusive Multicast Ethernet Tag routes) are used for multicast or BUM (Broadcast, Unknown Unicast, Multicast) traffic handling in VXLAN networks.
MPLS Label Field: In MPLS (Multiprotocol Label Switching), the label field is used to identify the forwarding equivalence class (FEC) or virtual circuit. In EVPN with VXLAN, MPLS labels can be used in underlay networks, but VXLAN itself relies on a VNI (VXLAN Network Identifier) in the VXLAN header for overlay segmentation.
Layer 3 VNI: A Layer 3 VNI is associated with inter-subnet routing in EVPN, typically carried in Type 5 routes (IP Prefix routes) for Layer 3 forwarding. Type 3 routes, however, focus on multicast distribution and carry a Layer 2 VNI or multicast group information, not a Layer 3 VNI.
MPLS Label in Type 3 Routes: The MPLS label in Type 3 routes, if used, identifies the VXLAN tunnel or multicast group, not a Layer 3 VNI. The Layer 3 VNI is specific to Type 5 routes for routing between subnets, not Type 3’s multicast focus.
Thus, the statement is FALSE (B) because the MPLS Label field in EVPN Type 3 routes does not carry a Layer 3 VNI; it relates to Layer 2 multicast or tunnel identification.