Verified & Latest NCS-Core Dump Q&As with Correct Answers [Q116-Q140]

Q116. A Nutanix cluster is deployed with the following configuration:
* Three four-node blocks (A, B, and C)
* All Flash Redundancy Factor 2
What is the effect of simultaneous disk failures on two nodes located in block A?

Q117. 전시회를 참조하세요.

A consultant is installing AOS 5.10 and ESXi 6.5 on three nodes. During the Foundation process, ESXi 6.5 is not available as one of the choices for hypervisor.
Which solution should the consultant use?

Q118. Refer to Exhibit:

A consultant is conducting cluster deployment using Foundation VM on a laptop.
What troubleshooting step is required?

Q119. A consultant configures an ESXi cluster which will utilize a vSphere Distributed Switch (vDS). The consultant has just migrated the first host to the dvSwitch when several alerts appear within Prism Element regarding Host-to-CVM connectivity.
What is causing these alerts?

Q120. A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?

Q121. During a technical call with a customer, it is identified that this installation will be software only on Dell servers. The out-of-band management interfaces will not be given IP addresses until the consultant is onsite.
Which Foundation method should be used for this type of installation?

Q122. A consultant deploys a new ESXi-based Nutanix cluster and migrates a sphere deployment to the cluster, After completing the deployment, the customer states they are experiencing VM performance issues.
Upon observing logs and performance data, the consultant identified the following symptoms.
Excessive read/write 1/Os on CVMs
Excessive Motion of VMs
이 문제의 원인은 무엇인가요?

Q123. Which container advanced setting should be configured to prevent ISO container images from exceeding a
100GB limit.

Q124. 한 조직에서 AOS 5.10.x 및 VMware vSphere 6.7을 기반으로 Nutanix 클러스터를 실행하고 있습니다. 현재 CVM 네트워크는 세그먼트화되어 있으며 스토리지 전용 노드는 존재하지 않습니다.
NSX를 기반으로 하는 새로운 보안 프로젝트가 시작됩니다. VMware 분산 가상 스위치가 필요합니다. 관리자는 새 프로젝트를 위한 환경을 준비해야 합니다.
관리자가 프로젝트를 시작하려면 어떤 단계를 사용해야 하나요?

Q125. 관리자가 VM을 새 Nutanix 클러스터로 마이그레이션합니다. 마이그레이션 후 관리자는 다음 조건을 관찰합니다:
* 클러스터 메모리 사용률: 64%
* 클러스터 CPU 사용률: 19%
* Clusterstorage utilization: 32%
* 평균 VM CPU 사용률: 25%
* 평균 VM CPU 준비 상태%: 24%
* 평균 VM 메모리 사용률: 60%
VM 성능을 개선하기 위해 관리자가 변경해야 하는 두 가지 사항은 무엇입니까? (두 가지를 선택하십시오.)

Q126. An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest’s iSCSI initiator to the volume group, they begin performance testing.
The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.
Which situation is causing this condition?

Q127. How should a consultant validate the installed version of an NVIDIA driver in a Nutanix VDI deployment?

Q128. After uploading a hypervisor ISO during the Foundation process, a consultant sees a message that the MD5 sum for the hypervisor is not found in the Whitelist file.
Which step should the consultant take next to resolve this issue?

Q129. 전시회를 참조하세요.

An administrator notices a critical alert on the Metro Availability Protection Domain What is causing this alert?

Q130. A consultant notes that a customer environment requires Nutanix storage containers to be mounted on non-Nutanix hosts for manual data migration workflows.
What configuration should the consultant validate to ensure setup was performed properly?

Q131. An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed.
The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?

Q132. Where can a consultant find Nutanix Enablement Starter Packs (ESPs)?

Q133. A consultant finishes creating a new ESXi cluster. The consultant connects to the nodes via laptop and a personal flat switch. The host/CVM network is on VLAN 23. The customer has the native VLAN on the ToR switches set to 23.
The customer wants to use LACP. Before placing the nodes on the customer network, the consultant tags VLAN 23 for each host and CVM. The consultant connects the nodes to the customer network and finds that they are unreachable.
이 문제의 원인은 무엇인가요?

Q134. An administrator protected a DB VM running on a Nutanix cluster with NearSync Replication, which schedules to repeat every 15 minutes to a second site. The daily change rate is low. During nightly backups, the replication window is missed due to write volume.
Which two options describe the expected behavior? (Choose two.)

Q135. A consultant deployed a Nutanix Files cluster using separate networks for client and storage.
For testing a SMB standard share, a VM has been deployed on storage network. However, the consultant cannot access the share.
What is the cause of the issue?

Q136. A consultant has been tasked with increasing security on a Nutanix cluster by disabling password authentication when accessing the CVM and AHV hosts and instead moving to key-based SSH.
What is the easiest way for the consultant to meet these requirements?

Q137. A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:
* AHV nodes
* SAP HANA version 2
* Production database files
Which configuration should be recommended to the customer?

Q138. An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?

Q139. A consultant is running Foundation. The cluster creation fails during the process. The host logs confirm that the nodes have been successfully imaged. The consultant decides to create the cluster manually.
Which command should the consultant use?

Q140. An administrator deletes a large amount of data from a Volume Group presented to a Linux VM. The administrator notices that the deleted data has not been reclaimed as usable storage.
Whataction should be taken to reclaim the storage capacity?