Share Latest Dec-2023 NSE7_OTS-6.4Test Practice Test Questions, Exam Dumps [Q11-Q27]

Rate this post

Share Latest Dec-2023 NSE7_OTS-6.4Test Practice Test Questions, Exam Dumps

Positive Aspects of Valid Dumps NSE7_OTS-6.4 Exam Dumps!

Fortinet NSE7_OTS-6.4 certification exam is an essential credential for cybersecurity professionals who specialize in OT security. NSE7_OTS-6.4 exam validates the skills and knowledge required to protect critical infrastructure from cyber threats and demonstrates the ability to design, implement, and manage security solutions for OT environments. Fortinet NSE 7 – OT Security 6.4 certification is highly valued in the cybersecurity industry and is a valuable asset for professionals who want to advance their careers.

QUESTION 11
When you create a user or host profile, which three criteria can you use? (Choose three.)

Host or user group memberships

Administrative group membership

An existing access control policy

Location

Host or user attributes

https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles

QUESTION 12
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)

Enhanced point of connection details

Direct VLAN assignment

Adapter consolidation for multi-adapter hosts

Importation and classification of hosts

QUESTION 13
Refer to the exhibit, which shows a non-protected OT environment.

An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)

Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.

Deploy a FortiGate device within each ICS network.

Configure firewall policies with web filter to protect the different ICS networks.

Configure firewall policies with industrial protocol sensors

Use segmentation

QUESTION 14
Refer to the exhibit and analyze the output.

Which statement about the output is true?

This is a sample of a FortiAnalyzer system interface event log.

This is a sample of an SNMP temperature control event log.

This is a sample of a PAM event type.

This is a sample of FortiGate interface statistics.

QUESTION 15
Refer to the exhibit.

An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)

The FortiGate-Edge device must be in NAT mode.

NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.

The FortiGate devices is in offline IDS mode.

Port5 is not a member of the software switch.

QUESTION 16
What triggers Layer 2 polling of infrastructure devices connected in the network?

A failed Layer 3 poll

A matched security policy

A matched profiling rule

A linkup or linkdown trap

QUESTION 17
What two advantages does FortiNAC provide in the OT network? (Choose two.)

It can be used for IoT device detection.

It can be used for industrial intrusion detection and prevention.

It can be used for network micro-segmentation.

It can be used for device profiling.

Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.

QUESTION 18
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?

Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.

Create a notification policy and define a script/remediation on FortiSIEM.

Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.

Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.

https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript

QUESTION 19
Refer to the exhibit.

Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)

FortiGate for SD-WAN

FortiGate for application control and IPS

FortiNAC for network access control

FortiSIEM for security incident and event management

FortiEDR for endpoint detection

QUESTION 20
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)

Services defined in the firewall policy.

Source defined as internet services in the firewall policy

Lowest to highest policy ID number

Destination defined as internet services in the firewall policy

Highest to lowest priority defined in the firewall policy

QUESTION 21
Refer to the exhibit

In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?

PLCs use IEEE802.1Q protocol to communicate each other.

An administrator can create firewall policies in the switch to secure between PLCs.

This integration solution expands VLAN capabilities from Layer 2 to Layer 3.

There is no micro-segmentation in this topology.

QUESTION 22
Refer to the exhibit.

You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?

In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.

In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.

In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.

In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.

QUESTION 23
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)

You must set correct operator in event handler to trigger an event.

Each playbook can include multiple triggers.

You can automate SOC tasks through playbooks.

You cannot use Windows and Linux hosts security events with FortiSoC.

Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc

QUESTION 24
Refer to the exhibit and analyze the output.

Which statement about the output is true?

This is a sample of a FortiAnalyzer system interface event log.

This is a sample of an SNMP temperature control event log.

This is a sample of a PAM event type.

This is a sample of FortiGate interface statistics.

QUESTION 25
Refer to the exhibit.

An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)

The FortiGate-Edge device must be in NAT mode.

NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.

The FortiGate devices is in offline IDS mode.

Port5 is not a member of the software switch.

QUESTION 26
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)? (Choose three.)

FortiNAC

FortiManager

FortiAnalyzer

FortiSIEM

FortiGate

1. FortiNAC – FortiNAC is a network access control solution that provides visibility and control over network devices. It can identify devices, enforce access policies, and automate threat response.
2. FortiSIEM – FortiSIEM is a security information and event management solution that can collect and analyze data from multiple sources, including network devices and servers. It can help identify potential security threats, as well as monitor compliance with security policies and regulations.
3. FortiAnalyzer – FortiAnalyzer is a central logging and reporting solution that collects and analyzes data from multiple sources, including FortiNAC and FortiSIEM. It can provide insights into network activity and help identify anomalies or security threats.
Reference:
Fortinet NSE 7 – OT Security 6.4 Study Guide, Chapter 4: OT Security Devices, page 4-20.

QUESTION 27
Which three common breach points can be found in a typical OT environment? (Choose three.)

Global hat

Hard hat

VLAN exploits

Black hat

RTU exploits

Loading …

Fortinet NSE7_OTS-6.4 exam is a challenging exam that requires candidates to have a deep understanding of OT security concepts and technologies. Candidates must be able to apply their knowledge to real-world scenarios and demonstrate their ability to design and implement secure OT networks. NSE7_OTS-6.4 exam is a valuable certification for network security professionals who want to advance their careers and demonstrate their expertise in securing OT networks.

Practice LATEST NSE7_OTS-6.4 Exam Updated 37 Questions: https://www.passtestking.com/Fortinet/NSE7_OTS-6.4-practice-exam-dumps.html

Categories:NSE7_OTS-6.4Fortinet