Free RedHat (EX200) Certification Sample Questions with Online Practice Test [Q14-Q36]

Published date December 28, 2025

Rate this post

Free RedHat (EX200) Certification Sample Questions with Online Practice Test

EX200 Certification Study Guide Pass EX200 Fast

NEW QUESTION 14
Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.

Answer see in the explanation.
Explanation/Reference:
# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and the extended partition is further divided into logical partitions) Enter
+2G
t
l
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)

NEW QUESTION 15
Install the Kernel Upgrade.
Install suitable kernel update from:
http://server.domain11.example.com/pub/updates.
Following requirements must be met:
Updated kernel used as the default kernel of system start-up.
The original kernel is still valid and can be guided when system starts up.

Using the browser open the URL in the question, download kernel file to root or home directory.
uname -r// check the current kernel version
rpm -ivh kernel-*.rpm
vi /boot/grub.conf// check
Some questions are: Install and upgrade the kernel as required. To ensure that grub2 is the default item for startup.
Yum repo : http://content.example.com/rhel7.0/x86-64/errata
OR
uname -r // check kernel
Yum-config-manager –add-repo=”http://content.example.com/rhel7.0/x86-64/ errata” Yum clean all Yum list kernel// install directly Yum -y install kernel// stuck with it, do not pipe! Please do not pipe!
Default enable new kernel grub2-editenv list// check
Modify grub2-set-default “kernel full name”
Grub2-mkconfig -o/boot/grub2/grub.cfg// Refresh

NEW QUESTION 16
Part 1 (on Node1 Server)
Task 14 [Managing SELinux Security]
You will configure a web server running on your system serving content using a non-standard port (82)

* [root@node1 ~]# curl http://node1.domain15.example.com
curl: (7) Failed to connect to node1.domain15.example.com port 80: Connection refused
[root@node1 ~]# yum install httpd
[root@node1 ~]# systemctl enable –now httpd
Created symlink /etc/systemd/system/multi-user.target.wants/httpd.service → /usr/lib/systemd/system/httpd.service.
[root@node1 ~]# systemctl start httpd
[root@node1 ~]# systemctl status httpd
Status: “Running, listening on: port 80”
* [root@node1 ~]# wget http://node1.domain15.example.com
2021-03-23 13:27:28 ERROR 403: Forbidden.
[root@node1 ~]# semanage port -l | grep http
http_port_t tcp 80, 81, 443, 488, 8008, 8009, 8443, 9000
[root@node1 ~]# semanage port -a -t http_port_t -p tcp 82
[root@node1 ~]# semanage port -l | grep http
http_port_t tcp 82, 80, 81, 443, 488, 8008, 8009, 8443, 9000
[root@node1 ~]# firewall-cmd –zone=public –list-all
[root@node1 ~]# firewall-cmd –permanent –zone=public –add-port=82/tcp
[root@node1 ~]# firewall-cmd –reload
[root@node1 ~]# curl http://node1.domain15.example.com
OK
* root@node1 ~]# wget http://node1.domain15.example.com:82
Connection refused.
[root@node1 ~]# vim /etc/httpd/conf/httpd.conf
Listen 82
[root@node1 ~]# systemctl restart httpd
[root@node1 ~]# wget http://node1.domain15.example.com:82
2021-03-23 13:31:41 ERROR 403: Forbidden.
[root@node1 ~]# curl http://node1.domain15.example.com:82
OK

NEW QUESTION 17
Configure your system so that it is an NTP client of server.domain11.example.com

see explanation below.
Explanation
#system-config-date
Note: dialog box will open in that
Check mark Synchronize date and time over network. Remove all the NTP SERVER and click ADD and type server.domain11.example.com
****************And then press ENTER and the press OK***************

NEW QUESTION 18
Which of the following mechanisms are used for service discovery in a container environment? (Choose two
correct answers.)

The container platform offers a command like docker service discoverwhich should be run within a
container.

The container platform sets environment variables containing service information within the containers.

The container platform lists localhost ports assigned to containers in each container’s /etc/servicesfile.

The container platform mounts the sockets for all available services into the container’s file systems.

The container platforms maintains DNS records which point to containers offering a specific service.

NEW QUESTION 19
CORRECT TEXT
Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)

# vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
——————————————————————————- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
OR
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)

NEW QUESTION 20
What must be the first line of a plain text user-data configuration containing YAML configuration for cloud-init?

cloud-config:

— cloud-config

#!/usr/bin/cloud-init

[cloud-config]

#cloud-config

Explanation/Reference:
Reference https://cloudinit.readthedocs.io/en/latest/topics/examples.html

NEW QUESTION 21
Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.

# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and the extended partition is further divided into logical partitions) Enter
+2G t
8 I
82
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)

NEW QUESTION 22
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP Forwarding.
1. echo “1” >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf net.ipv4.ip_forward=1

/proc is the virtual filesystem, containing the information about the running kernel.
To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the value from /etc/sysctl.conf.

NEW QUESTION 23
Configure /var/tmp/fstab Permission.
Copy the file /etc/fstab to /var/tmp/fstab. Configure var/tmp/fstab permissions as the following:
Owner of the file /var/tmp/fstab is Root, belongs to group root
File /var/tmp/fstab cannot be executed by any user
User natasha can read and write /var/tmp/fstab
User harry cannot read and write /var/tmp/fstab
All other users (present and future) can read var/tmp/fstab.

cp /etc/fstab /var/tmp/
/var/tmp/fstab view the owner setfacl -m u:natasha:rw- /var/tmp/fstab setfacl -m u:haryy:— /var/tmp/fstab Use getfacl /var/tmp/fstab to view permissions

NEW QUESTION 24
Update the kernel from ftp://instructor.example.com/pub/updates.
According the following requirements:
The updated kernel must exist as default kernel after rebooting the system.
The original kernel still exists and is available in the system.

rpm -ivh kernel-firm…
rpm -ivh kernel…

NEW QUESTION 25
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1

Answer see in the explanation.
Explanation/Reference:
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40 GATEWAY=172.24.40.1
DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim /etc/ sysconfig/network
(Configure Host Name)

NEW QUESTION 26
Which of the following Ansible tasks copies the file example.txtto a manage system?
– rsync:

src: example.txt
dst: /tmp/example.txt
– copy:

src: example.txt
dest: /tmp/example.txt
– retrieve:

src: example.txt
dest: /tmp/example.txt
– cp:

source: example.txt
dst: /tmp/example.txt
– transfer:

src: example.txt
dest: /tmp/example.txt

NEW QUESTION 27
Configure autofs to automount the home directories of LDAP users as follows:
host.domain11.example.com NFS-exports /home to your system.
This filesystem contains a pre-configured home directory for the user ldapuser11 ldapuser11’s home directory is host.domain11.example.com /rhome/ldapuser11 ldapuser11’s home directory should be automounted locally beneath /rhome as /rhome/ldapuser11 Home directories must be writable by their users ldapuser11’s password is ‘password’.

vim /etc/auto.master /rhome /etc/auto.misc
wq!
# vim /etc/auto.misc
ldapuser11 –rw,sync host.domain11.example.com:/rhome/ldpauser11 :wq!
#service autofs restart
service autofs reload
chkconfig autofs on
su -ldapuser11
Login ldapuser with home directory
# exit

NEW QUESTION 28
Configure autofs to make sure after login successfully, it has the home directory autofs, which is shared as /rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users can use the home directory normally.

# chkconfig autofs on
# cd /etc/
# vim /etc/auto.master
/rhome /etc/auto.ldap
# cp auto.misc auto.ldap
# vim auto.ladp
ldapuser40 -rw,soft,intr 172.24.40.10:/rhome/ldapuser40
* -rw,soft,intr 172.16.40.10:/rhome/&
# service autofs stop
# server autofs start
# showmount -e 172.24.40.10
# su – ladpuser40

NEW QUESTION 29
Who ever creates the files/directories on a data group owner should automatically be in the same group owner as data.

1. chmod g+s /data
2. Verify using: ls -ld /data
Permission should be like this: drwxrws— 2 root sysadmin 4096 Mar 16 18:08 /data If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory. To set the SGID bit: chmod g+s directory To Remove the SGID bit: chmod g-s directory

NEW QUESTION 30
CORRECT TEXT
Configure the system synchronous as 172.24.40.10.

Graphical Interfaces:
System–>Administration–>Date & Time
OR
# system-config-date

NEW QUESTION 31
Which of the following information is contained in the output of git status? (Choose three correct answers.)

Changed files that will not be part of the next commit.

Locked files which cannot be edited until the lock is released.

Changed files that will be part of the next commit.

Unchanged files which have not been edited locally.

Untracked files which are not subject to version control.

NEW QUESTION 32
We are working on /data initially the size is 2GB. The /dev/test0/lvtestvolume is mount on /dat a. Now you required more space on /data but you already added all disks belong to physical volume. You saw that you have unallocated space around 5 GB on your harddisk. Increase the size of lvtestvolume by 5GB.

Create a partition having size 5 GB and change the syste id ‘8e’.
use partprobe command
pvcreate /dev/hda9 Suppose your partition number is hda9.
vgextend test0 /dev/hda9 vgextend command add the physical disk on volume group.
lvextend -L+5120M /dev/test0/lvtestvolume
verify using lvdisplay /dev/test0/lvtestvolume.

NEW QUESTION 33
Find all lines in the file /usr/share/dict/words that contain the string seismic. Put a copy of all these lines in their original order in the file /root/wordlist. /root/wordlist should contain no empty lines and all lines must be exact copies of the original lines in /usr/share/dict/words.

see explanation below.
Explanation
grep seismic /usr/share/dict/words> /root/wordlist

NEW QUESTION 34
Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you to configure yum direct to the already existing file server. )

Answer see in the explanation.
Explanation/Reference:
# cd /etc/yum.repos.d
# vim local.repo
[local]
name=local.repo
baseurl=file:///mnt
enabled=1
gpgcheck=0
# yum makecache
# yum install -y vsftpd
# service vsftpd restart
# chkconfig vsftpd on
# chkconfig –list vsftpd
# vim /etc/vsftpd/vsftpd.conf
anonymous_enable=YES

NEW QUESTION 35
CORRECT TEXT
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1

# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40
GATEWAY=172.24.40.1
DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim
/etc/sysconfig/network
(Configure Host Name)

NEW QUESTION 36
1. Find all sizes of 10k file or directory under the /etc directory, and copy to /tmp/findfiles directory.
2. Find all the files or directories with Lucy as the owner, and copy to /tmp/findfiles directory.

see explanation below.
Explanation
(1)find /etc -size 10k -exec cp {} /tmp/findfiles \;
(2)find / -user lucy -exec cp -a {} /tmp/findfiles \;
Note: If find users and permissions, you need to use cp – a options, to keep file permissions and user attributes etc.

Loading …

Get Perfect Results with Premium EX200 Dumps Updated 157 Questions: https://www.passtestking.com/RedHat/EX200-practice-exam-dumps.html

Categories:EX200RedHat

Tags:EX200 composite latest test price EX200 latest exam camp questions EX200 latest exam tips EX200 latest test sims EX200 new study questions free EX200 real question on the exam EX200 valid practice questions

admin

RHCE / RedHat

[Mar-2024] RedHat RHCE Official Cert Guide PDF [Q49-Q66]
EX447 / RedHat

Authentic RedHat EX447 Exam Dumps PDF – Aug-2022 Updated [Q11-Q29]
EX200 / RedHat

100% Pass Top-selling EX200 Exams – New 2025 RedHat Pratice Exam [Q54-Q78]
EX294 / RedHat

100% Pass Top-selling EX294 Exams – New 2022 RedHat Pratice Exam [Q18-Q40]

EX200 Practice Tests

Free RedHat (EX200) Certification Sample Questions with Online Practice Test [Q14-Q36]
100% Pass Top-selling EX200 Exams – New 2025 RedHat Pratice Exam [Q54-Q78]

Related Certifications

EX447
RHCE
EX200
EX294

Exam Practice Questions

Free RedHat (EX200) Certification Sample Questions with Online Practice Test [Q14-Q36]

Leave a Reply Cancel reply

Related Posts

[Mar-2024] RedHat RHCE Official Cert Guide PDF [Q49-Q66]

Authentic RedHat EX447 Exam Dumps PDF – Aug-2022 Updated [Q11-Q29]

100% Pass Top-selling EX200 Exams – New 2025 RedHat Pratice Exam [Q54-Q78]

100% Pass Top-selling EX294 Exams – New 2022 RedHat Pratice Exam [Q18-Q40]

Leave a Reply Cancel reply