[Dec-2025] Use Real 300-610 Dumps Free Sample Questions and Practice Test Engine [Q160-Q174]

NO.160 Drag and drop the technologies from the left onto the correct descriptions on the right.

NO.161 An engineer requires a solution that achieves Ethernet traffic forwarding on all available paths from the hosts to the Cisco Nexus Fabric Extender and from the Fabric Extenders to the Cisco Nexus 5000 Series Switches.
The NIC teaming from the Fabric Extender to a server should use an LACP EtherChannel. Which solution should be implemented to meet these requirements?

NO.162 A customer is evaluating a new disaster-recovery solution for their SAN, which is used for noncritical CRM purposes. The SAN is frequently backed up locally at the customer’s existing single location, and several hours of data loss can be sustained. The customer wants to retain complete control of the failover process to a separate physical location. Which type of DR is most suitable for the customer?

NO.163 Drag and drop the configurations from the left onto the correct policies on the right.

NO.164 An engineer must connect a Cisco UCS Fabric Interconnect to a storage array using a Fibre Channel protocol.
The SAN must be directly connected to the UCS fabric interconnects using ports 1/1 and 1/2. Which fabric interconnect configuration must be used?

NO.165 An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)

NO.166 Refer to the exhibit. An engineer is setting up the NPV fabric configuration and must choose the correct port type for the switched port analyzer interface of the NPV device. Which port type must the engineer choose?

NO.167 A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.
Which two data center design steps must be used to meet these requirements? (Choose two.)

NO.168 A SAN fabric is built between a pair of Cisco MDS 9000 Series Switches. The requirement is for the ISL to use the VSAN ID to toward traffic from multiple VSANs across the same physical link.
Additionally, the Fibre Channel trace feature must be supported.
Which ISL interface parameters are required to meet these requirements?

NO.169 A network architect designs a high-availability architecture for the Cisco UCS Fabric interconnects that installed in a data center. The architecture must support clustering and redundancy. Which architecture meets these requirements?

NO.170 When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?

NO.171 A small company hosts several critical applications on bare-metal servers connected via iSCSI protocol to shared JBOD storage. One of the critical applications is experiencing latency issues, which the engineering team suspects is due to incorrect prioritization for iSCSI traffic. An engineer must update the network QoS settings to prioritize iSCSI traffic with these requirements:
iSCSI traffic must be prioritized.
The solution must be able to differentiate between different types of iSCSI traffic.
The solution must be scalable because iSCSI traffic is expected to increase in the future.
The solution must not disrupt other traffic.
Which two configurations must the engineer apply to the devices on the network to meet the requirements? (Choose two.)

NO.172 An engineer must design a multitenant solution using Cisco 7709 switches. The solution must support separate routing instances, separate spanning tree domains, and separate firewalls for each tenant.
Which solution meets these requirements?

NO.173 A data center with high network-traffic demands is facing challenges related to link throughput, with recent reports of significant traffic congestion and performance degradation. To ensure optimal network performance and user experience, a network engineer implemented PFC and enabled jumbo frames on all network devices in the data center. However, the senior network architect requested further improvements to completely resolve the issue. The solution must follow IEEE 802.1 AX and IEEE 802.3ad principles. Which action must the network engineer take to accomplish the goal?

NO.174 An engineer installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-
2208XP I/ O modules. The full bandwidth of the I/O module must be utilized.
Which two elements should be used in this environment? (Choose two.)