Clear your concepts with CWDP-305 Questions Before Attempting Real exam [Q75-Q94]

Rate this post

Clear your concepts with CWDP-305 Questions Before Attempting Real exam

Get professional help from our CWDP-305 Dumps PDF

NO.75 Looking at a client radio specification sheet that states Receive Sensitivity of #82 dBm @ 18 Mbps would mean:
Response:

 
 
 
 

NO.76 In a convention center, you have received complaints about the WLAN infrastructure. At this moment, the are only two APs in one auditorium.
After analyzing the situation, you determined that there are more client devices that the infrastructure was designed for. There are only two APs to support more than 300 devices using the Wi-Fi at the same time.
What should you do to make the Wi-Fi work as expected?
Response:

 
 
 
 

NO.77 When designing for OFDMA, why might the same channel bandwidth result in greater efficiency than that available in 802.11n and 802.11ac?

 
 
 
 

NO.78 When performing an active site survey in an existing WLAN infrastructure, in addition to gathering throughput data, what other important function will you typically be testing at the same time?

 
 
 
 

NO.79 ABC Company has a WLAN controller with 10 controller-based APs; the Voice SSID is configured for centralized data forwarding. Each AP is connected to an access port on a layer-2 Ethernet switch. Each layer-
2 switch is uplinked to a single layer-3 core Ethernet switch. The WLAN controller is connected directly to the layer-3 core Ethernet switch. Layer-3 tunnels are created between all controller-based APs and the WLAN controller. A voice server is connected to the layer-3 Ethernet switch.
When a voice-enabled QoS STA sends an IP data packet to a voice server in this scenario, the DSCP value carried in the STA’s IP data packet gets mapped to what and by which device?

 
 
 
 

NO.80 In a manufacturing facility with highly reflective materials, you are planning an upgrade to your existing
802.11b WLAN implementation. You have chosen a dual-band 802.11n infrastructure product for this purpose. Your client applications include:
Handheld scanners for inventory management
Toughbooks (laptops) mounted on forklifts for inventory and workflow management VoWiFi phones used by select employees throughout the facility You are evaluating all of the 802.11n enhancements and determining which features to enable for your environment and applications.
In this scenario, what 802.11n enhancement typically should NOT be enabled on the 2.4 GHz radio of the new APs?

 
 
 
 

NO.81 An organization is implementing a new WLAN. They are upgrading a very old 802.11g network that only a few devices used Now. they expect more than 250 devices to use the new WLAN that will operate 802.11ax Aps. What wired-side consideration should you address in your design recommendations?

 
 
 
 

NO.82 What functions do the control plane of centralized and distributed WLAN architectures help solve?(Choose all that apply.) Response:

 
 
 
 

NO.83 In an RSN requiring low-latency reassociations and no fast secure roaming protocols, what security solutions are ideal for protecting VoWiFi communication?(Choose all that apply.) Response:

 
 
 
 
 

NO.84 NicoCo is building a new facility and would like to install a WLAN for primary connectivity of all clients. The requirements are dual-spectrum 802.11n supporting voice and location tracking.
What type of pre-deployment survey should be performed?
Response:

 
 
 
 
 

NO.85 After importing a floor plan to a predictive design tool, what should be done prior to adding APs, antennas and attenuators (e.g., walls)?

 
 
 
 

NO.86 When live video streaming solutions that transmit simultaneously to more than one recipient are used, what special capability should be considered and configured in all affected WLAN implementations?

 
 
 
 

NO.87 An amplifier has a 1 dB compression point of 32 dBm and a gain of 20 dB. Which is the highest average input power shown here that would be safe to operate a 24 Mbps 802.11g signal so that spectral regrowth is not a problem?

 
 
 
 

NO.88 In 802.11, clients are required to be calibrated for RSSI and SNR reporting to:

 
 
 
 
 
 

NO.89 What happens when you double the channel width (for example, use channel bonding) in a BSS?

 
 
 
 

NO.90 You’re about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that QoS is properly configured throughout the network.
What Access
Category (AC) should voice frames/packets use?

 
 
 
 

NO.91 Main Topic:Designing for Specific Applications
Question:
What are some common problems with short (12 or fewer characters) ASCII passphrases in WPA/WPA2- Personal networks?

 
 
 
 

NO.92 What kind of applications has the character traits of many communications back and forth between the server and client for each transaction initiated by the user?
For example, several files, images and other data files may be required to download to the client with each click from the user. Choose the best answer.
Response:

 
 
 
 
 

NO.93 How can you increase efficiency in an 802.11n 2.4 GHz multiple-channel architecture network?

 
 
 
 

NO.94 Main Topic:Advanced Site Surveys
Question:
You have been tasked with performing safety and operations training for outdoor bridge link installation. The antennas are to be installed on a 70-foot tower on one end and the rooftop of an office building on the other end.
What might be required for the tower installation?

 
 
 
 

Achieve the CWDP-305 Exam Best Results with Help from CWNP Certified Experts: https://www.passtestking.com/CWNP/CWDP-305-practice-exam-dumps.html

Related Links: www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw

admin

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below
 

Post comment