Huawei H35-580_V2.0 Exam Prep Guide Prep guide for the H35-580_V2.0 Exam [Q16-Q36]

Published date July 29, 2026

4.7/5 - (3 votes)

Huawei H35-580_V2.0 Exam Prep Guide: Prep guide for the H35-580_V2.0 Exam

2026 New Preparation Guide of Huawei H35-580_V2.0 Exam

Huawei, a leading global provider of information and communications technology (ICT) infrastructure and smart devices, has recently launched the Huawei H35-580_V2.0 (HCIA-5G-RNP&RNO V2.0) certification exam. HCIA-5G-RNP&RNO V2.0 certification exam is designed to validate the skills and knowledge of individuals who are interested in working with 5G Radio Network Planning and Optimization (RNP&RNO) technologies. The Huawei H35-580_V2.0 exam is an advanced-level certification that helps professionals gain expertise in the latest 5G technologies, including 5G network architecture, 5G RNP&RNO, and 5G network planning.

NEW QUESTION 16
Which of the following are the cause values of QoS flow setup failures?(Select All that Apply)

No response from the UE

Insufficient transmission resources

Unauthorized UE

Insufficient radio resources

Explanation
According to the HCIA-5G V2.0 Exam Outline, no response from the UE, insufficient radio resources, and unauthorized UE are cause values of QoS flow setup failures, which correspond to options A, B, and D.
Insufficient transmission resources is not a cause value of QoS flow setup failures, but a cause value of handover execution failures, which corresponds to option C.

NEW QUESTION 17
The redirection process has lower service interruption delay than the switching process.

True

False

Redirection requires the UE to reselect and establish a new connection, which generally causes longer service interruption. Handover (switching) maintains connection continuity and usually results in lower interruption delay.

NEW QUESTION 18
On a 5G network, the NAS layer uses 5G-GUTI to replace IMSI as the temporary ID of a UE for security reasons.

True

False

Explanation
According to the 5G-GUTI – 5G Globally Unique Temporary Identity, the NAS layer uses 5G-GUTI to replace IMSI as the temporary ID of a UE for security reasons. The 5G-GUTI is allocated by the AMF (Core Access and Mobility Management Function) at the time of network registration, and it is composed of the GUAMI (Globally Unique AMF ID) and the 5G-TMSI (5G Temporary Mobile Subscriber Identity).

NEW QUESTION 19
In RAN3.0 version, which of the following PUCCH formats does the base station not support?

Format 1

Format 2

Format 4

Format 3

RAN3.0 supports PUCCH Formats 1, 2, and 3, but does not support Format 4.

NEW QUESTION 20
Which of the following modules is responsible for the selection of PCF during the PDU session establishment process?

AUSF

SMF

NSSF

AMF

The Session Management Function (SMF) is responsible for selecting the appropriate PCF during PDU session establishment.

NEW QUESTION 21
In the cell search process in 5G SA, a UE completes frame synchronization after reading the SS.

True

False

Explanation
According to the 5G SA Cell Search & Network Entry Matrix, a UE completes frame synchronization after reading the MIB, not the SS. The SS (Synchronization Signal) is used for initial detection and coarse timing synchronization, but it does not provide enough information for frame synchronization. The MIB (Master Information Block) is part of the SSB (Synchronization Signal Block) and contains essential system information, such as system frame number and subcarrier spacing, which are needed for frame synchronization.

NEW QUESTION 22
Which of the following spectrum sharing technologies can be used in the 3.5 GHz+2.1 GHz uplink and downlink decoupling/super uplink architecture?

3.5 GHz NR and 2.1 GHz LTE share both the downlink and uplink spectrums.

2.1 GHz NR and 2.1 GHz LTE share both the downlink and uplink spectrums.

3.5 GHz NR and 2.1 GHz LTE only share the uplink spectrums.

2.1 GHz NR and 2.1 GHz LTE only share the uplink spectrums.

Explanation
According to the HCIA-5G V2.0 Exam Outline, the 3.5 GHz+2.1 GHz uplink and downlink decoupling/super uplink architecture uses spectrum sharing technologies such as Dynamic Spectrum Sharing (DSS) and Spectrum Sharing (SS) to enable 3.5 GHz NR and 2.1 GHz LTE to share only the uplink spectrums, while the downlink spectrums are used exclusively by each technology.

NEW QUESTION 23
In SA networking, which of the following is the first step for a UE to perform a cell search?

Obtain the cell signal quality.

Obtain other cell information.

Synchronize frames and obtain PCI group number.

Synchronize half-frames and obtain the ID within a PCI group.

Explanation
According to the 5G SA Cell Search & Network Entry Matrix, the first step for a UE to perform a cell search in SA networking is to synchronize frames and obtain PCI group number. This step involves the following sub-steps:
The UE scans the available frequency range to detect the presence of Synchronization Signal Blocks (SSBs) from different base stations. SSBs are periodic signals that contain essential synchronization and system information for cell search and initial access.
The UE selects an SSB with the strongest signal strength and decodes its Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). The PSS and SSS are part of the SSB and provide coarse timing synchronization and cell identity information.
The UE uses the PSS and SSS information to synchronize its internal clock with that of the base station and obtain the Physical Cell Identity (PCI) group number. The PCI group number is a 9-bit value that identifies a group of 8 cells that share the same PSS and SSS sequences. The PCI group number ranges from 0 to 1007.
The other steps for a UE to perform a cell search in SA networking are:
Synchronize half-frames and obtain the ID within a PCI group: The UE further synchronizes its timing with the base station by decoding its Narrowband Synchronization Signal (NSSS), which is also part of the SSB. The NSSS provides more precise timing information and the ID within a PCI group, which is a
3-bit value that identifies a specific cell within a PCI group. The ID within a PCI group ranges from 0 to
7. By combining the PCI group number and the ID within a PCI group, the UE can obtain the full PCI, which is a 10-bit value that uniquely identifies a cell.
Obtain other cell information: The UE decodes other signals and channels in the SSB to acquire other cell information, such as system bandwidth, subcarrier spacing, frame structure, etc. These signals and channels include Demodulation Reference Signals (DMRS), Master Information Block (MIB), System Information Block (SIB), etc.
Obtain the cell signal quality: The UE measures the cell signal quality based on various indicators, such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), Signal-to-Interference-plus-Noise Ratio (SINR), etc. These indicators reflect the strength, quality, and interference level of the received signal.

NEW QUESTION 24
Which of the following SI messages must be read on a 5G network?

SIB2

SIB1

SIB4

SIB3

Explanation
According to the 5G SIB Messages, SIB1 is the only mandatory SI message that must be read on a 5G network. SIB1 contains essential information for accessing the network, such as cell identity, cell barring, and scheduling information for other SI messages. SIB2, SIB3, and SIB4 are optional SI messages that provide additional information such as radio resource configuration, intra-frequency cell reselection, and neighboring cell information.

NEW QUESTION 25
In SA networking, which of the following messages is used to deliver PRACH power control parameters to UEs?

SIB2

RRC reconfiguration

MIB

SIB1

Explanation
According to the 5G NR Uplink Power Control Procedure, SIB2 is the message that contains the PRACH power control parameters, such as msg3-Alpha, p0-NominalWithoutGrant, and p0-AlphaSets. These parameters are used by the UE to determine the transmit power of the PRACH preamble.

NEW QUESTION 26
In the uplink rate test for NR users, which of the following values is the recommended uplink maximum MIMO layers for 2T4R UEs?

Layer3

Layer2

Layer4

Layer1

Explanation
According to the HCIA-5G V2.0 Exam Outline, the uplink maximum MIMO layers for 2T4R UEs is 2, which corresponds to option B.

NEW QUESTION 27
What is the maximum bandwidth in mmWave bands as defined in 3GPP Release 16?

400MHz

60MHz

100MHz

20MHz

Explanation
According to the 5G mmWave Frequency Bands, the maximum bandwidth in mmWave bands as defined in
3GPP Release 16 is 400MHz, which can be achieved without any carrier aggregation method.

NEW QUESTION 28
Which of the following protocols/data belong to Layer 3 of the Uu interface?(Select All that Apply)

MAC protocol

RLC protocol

RRC protocol

IP data

Explanation
According to the LTE user plane protocol stack, the Layer 3 of the Uu interface consists of the RRC protocol and the IP data. The RRC protocol is responsible for radio resource management, access control, handover and mobility, and encryption and integrity protection. The IP data is the payload of the user plane that is transmitted over the PDCP layer.

NEW QUESTION 29
Which of the following factors does not need to be considered during PUSCH power calculation?

Number of PUSCH RBs

SCS configuration for the PUSCH

MCS index of the PUSCH

Number of PUSCH symbols in the time domain

According to the 5G NR Uplink Power Control Procedure , MCS index of the PUSCH is not a factor that needs to be considered during PUSCH power calculation. The MCS index determines the modulation and coding scheme of the PUSCH, but it does not affect the transmit power. The other factors, such as number of PUSCH RBs, SCS configuration for the PUSCH, and number of PUSCH symbols in the time domain, are all involved in the PUSCH power calculation formula.

NEW QUESTION 30
In a Huawei base station, which of the following bearers can only be configured as an MCG bearer?

QCI2

QCI6

QCI9

QQ1

Explanation
According to the LTE-NR tight-interworking and the first steps to 5G, in a Huawei base station, QCI2 can only be configured as an MCG (Master Cell Group) bearer. QCI2 is a voice bearer that requires low latency and high reliability. Therefore, it cannot be configured as an SCG (Secondary Cell Group) bearer or a split bearer that may introduce additional delay or packet loss. QCI6, QCI9, and QQ1 can be configured as either MCG bearers, SCG bearers, or split bearers depending on the service requirements and network conditions.

NEW QUESTION 31
Which of the following materials does not need to be prepared before site survey?

5G antenna height table

Site survey table

Local map

Engineering file

NEW QUESTION 32
For SA networking, voice solutions include VoNR and CSFB.

True

False

CSFB (Circuit Switched Fallback) relies on LTE/3G legacy networks and is not an SA voice solution. SA voice is primarily supported through VoNR.

NEW QUESTION 33
In high-frequency scenarios, what is the maximum subcarrier spacing that can be used for all channels and signals?

240 kHz

120 kHz

30 kHz

60 kHz

For FR2 (mmWave) deployments, NR supports subcarrier spacing up to 240 kHz.

NEW QUESTION 34
When using Probe to test the NSA network, it is found that the MAC layer rate of LTE uplink is 20 Mbps, but the PDCP layer rate is 0. Which of the following understandings is correct?

The bit error rate is too high and the data is retransmitted.

LTE data converges to NR’s PDCP layer.

Tool statistics anomaly.

PDCP layer failure.

In NSA Option 3 architecture, LTE acts as the anchor while user-plane data can converge at the NR PDCP layer.

NEW QUESTION 35
How much data does the SSB that occupies 20 RB resources carry?

432 bits

576 bits

972 bits

864 bits

An SSB consists of PSS, SSS, PBCH, and PBCH DMRS resources. The total payload associated with the occupied 20 RB resources corresponds to 864 bits.

NEW QUESTION 36
Which of the following protocols/data belong to Layer 3 of the Uu interface?(Select All that Apply)

MAC protocol

IP data

RLC protocol

RRC protocol

Loading …

Huawei H35-580_V2.0 (HCIA-5G-RNP&RNO V2.0) Exam is a certification exam that is designed to test candidates’ knowledge and skills in 5G radio network planning and optimization. H35-580_V2.0 exam is based on the latest 5G network technologies and industry standards, and is designed to help professionals stay up-to-date with the latest developments in the field.

Latest Questions H35-580_V2.0 Guide to Prepare Free Practice Tests: https://www.passtestking.com/Huawei/H35-580_V2.0-practice-exam-dumps.html

Categories:H35-580_V2.0Huawei

Tags:H35-580_V2.0 Books PDF H35-580_V2.0 Pass4sure pass guide H35-580_V2.0 pdf files H35-580_V2.0 reliable exam dumps.zip H35-580_V2.0 reliable test cost H35-580_V2.0 reliable test dumps materials H35-580_V2.0 valid study questions book new H35-580_V2.0 visual cert test

admin

H21-287_V1.0 / Huawei

[Feb-2026] Exam Sure Pass Huawei Certification with H21-287_V1.0 exam questions [Q52-Q72]
H35-481_V2.0 / Huawei

Updated PDF (New 2023) Actual Huawei H35-481_V2.0 Exam Questions [Q21-Q41]
H13-531_V2.0 / Huawei

Pass Your H13-531_V2.0 Exam at the First Try with 100% Real Exam Questions [Q229-Q249]
H12-722-ENU / Huawei

[Apr-2022] Free H12-722-ENU Exam Dumps to Improve Exam Score [Q43-Q64]
H19-301 / Huawei

[Feb-2023] Huawei H19-301 Test Engine PDF – All Free Dumps from PassTestking [Q40-Q55]
H19-431_V1.0 / Huawei

[Q66-Q86] Real Exam Questions H19-431_V1.0 Dumps Exam Questions in here [Nov-2024]

H35-580_V2.0 Practice Tests

Huawei H35-580_V2.0 Exam Prep Guide Prep guide for the H35-580_V2.0 Exam [Q16-Q36]

Related Certifications

H12-811
H19-427_V1.0-ENU
H31-341
H19-413_V1.0
H19-338-ENU
H19-308_V4.0
H13-311_V3.0
H19-423_V1.0-ENU
H13-231
H12-821_V1.0

Exam Practice Questions

Huawei H35-580_V2.0 Exam Prep Guide Prep guide for the H35-580_V2.0 Exam [Q16-Q36]

Leave a Reply Cancel reply

Related Posts

[Feb-2026] Exam Sure Pass Huawei Certification with H21-287_V1.0 exam questions [Q52-Q72]

Updated PDF (New 2023) Actual Huawei H35-481_V2.0 Exam Questions [Q21-Q41]

Pass Your H13-531_V2.0 Exam at the First Try with 100% Real Exam Questions [Q229-Q249]

[Apr-2022] Free H12-722-ENU Exam Dumps to Improve Exam Score [Q43-Q64]

[Feb-2023] Huawei H19-301 Test Engine PDF – All Free Dumps from PassTestking [Q40-Q55]

[Q66-Q86] Real Exam Questions H19-431_V1.0 Dumps Exam Questions in here [Nov-2024]

Leave a Reply Cancel reply